Хулоса

Parts of a Plane

This image shows two types of planes (woodworking tools) and labels some of the parts.

A: The mouth is an opening in the bottom of the plane down through which the blade extends, and up through which wood shavings pass.

B: The iron is a plate of steel with a sharpened edge which cuts the wood. Some people refer to it as the blade.

C: The lever cap holds the blade down firmly to the body of the plane.

D: The depth adjustment knob controls how far the blade extends through the mouth.

E: The knob is a handle on the front of the plane.

F: The chipbreaker or Cap iron serves to make the blade more rigid and to curl and break apart wood shavings as they pass through the mouth.

G: The lateral adjustment lever is used to adjust the iron by skewing it so that the depth of cut is uniform across the mouth.

H: The tote is a handle on the rear of the plane.(Some aficionados object to the use of the word tote preferring handle).

I: The finger rest knob Block planes are held in the palm of the hand while the tip of the user's index finger rests in the indentation on top of the knob. On some planes the knob is used to adjust the size of the mouth by allowing a sliding portion of the sole to be moved back or forward to accomplish this.

J: The frog is a sliding iron wedge that holds the plane iron at the proper angle. It slides to adjust the gap between the cutting edge and the front of the mouth. The frog is screwed down to the inside of the sole through two parallel slots and on many planes is only adjustable with a screwdriver when the plane iron is removed. Some planes, such as the Stanley Bedrock line and the bench planes made by Lie-Nielsen and WoodRiver/WoodCraft have a screw mechanism that allows the frog to be adjusted without removing the blade.

There is also an unlabeled image for translation purposes.

The image was created by User:etune. on http://en.wikipedia.org/wiki/Image:Plane_parts.jpg

Иҷозатнома

	This file is licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license. Subject to disclaimers.
	Шумо озодед: мубодилот намудан – копӣ, паҳн ва фиристадани асар ремикс кардан – татбиқи кор Under the following conditions: тахсис – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. саҳми яксон – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
	This licensing tag was added to this file as part of the GFDL licensing update.http://creativecommons.org/licenses/by-sa/3.0/CC BY-SA 3.0Creative Commons Attribution-Share Alike 3.0truetrue

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License. Subject to disclaimers.http://www.gnu.org/copyleft/fdl.htmlGFDLGNU Free Documentation Licensetruetrue