Шаблон:Infobox bridge

Мавод аз Википедиа — донишномаи озод
Ҳуҷҷатгузорӣ

Usage

Copy and paste the template below:

{{Infobox bridge
| name                = 
| native_name         = 
| native_name_lang    = 
| image               = 
| image_upright       = 
| alt                 = 
| caption             = 
| lat                 = 
| long                = 
| coordinates_display = inline,title
| coordinates_region  = 
| os_grid_reference   = 
| carries             = 
| crosses             = 
| locale              = 
| official_name       = 
| other_name          = 
| named_for           = 
| owner               = 
| maint               = 
| heritage            = 
| id                  = 
| id_type             = 
| website             = 
| preceded            = 
| followed            = 
| design              = 
| material            = 
| material1           = 
| material2           = 
| length              = 
| width               = 
| height              = 
| depth               = 
| traversable         = 
| towpath             = 
| mainspan            = 
| number_spans        = 
| piers_in_water      = 
| load                = 
| clearance_above     = 
| clearance_below     = 
| life                = 
| architect           = 
| designer            = 
| contracted_designer = 
| winner              = 
| engineering         = 
| builder             = 
| fabricator          = 
| begin               = 
| complete            = 
| cost                = 
| open                = 
| inaugurated         = 
| rebuilt             = 
| collapsed           = 
| closed              = 
| replaces            = 
| traffic             = 
| toll                = 
| map_type            = 
| map_relief          = 
| map_dot_label       = 
| map_image           = 
| map_size            = 
| map_alt             = 
| map_caption         = 
}}

Parameters

name
Name of bridge
native_name
Name of the bridge in the local language, if different
native_name_lang
ISO code for the local language (e.g. "fr" for French). If more than one, enter the native names using {{Lang}} instead.
image
Filename of image of the bridge
alt
Alt text for bridge image (see WP:ALT)
caption
Text for caption beneath image
lat
Latitude
long
Longitude
coordinates_display
Either "inline" or "inline,title"
coordinates_region
ISO 3166 code
os_grid_reference
OS grid reference
carries
Type of vehicles bridge carries
crosses
Body of water or geographic feature that is being crossed
locale
General area where located (e.g. San Francisco, Indiana-Kentucky State Line)
official_name
Official name
other_name
Also known as name
named_for
namesake
owner
Persons or body that owns the bridge
maint
Maintaining entity (e.g. California Department of Transportation)
heritage
Heritage status (e.g. UK listed building)
id
ID number, if available
id_type
Label for the ID field. The default, if this parameter is not specified, is ID number (for the United States National Bridge Inventory)
website
URL to the bridge's website; enclose within {{URL}}
preceded
Name of bridge upstream
followed
Name of bridge downstream
design
Type of bridge (cantilever, truss, suspension)
material
Construction material (concrete, steel, iron, stone, brick, wood)
material1
Construction material for trough
material2
Construction material for piers
length
Length of bridge, w/ conversions
width
Width of bridge, w/ conversions
height
Height of bridge, w/ conversions
depth
Depth of aqueduct channel, w/ conversions
traversable
Can standard craft (for that navigation) pass on the aqueduct? Yes/No
towpath
Side of towpath (None, N, S, E, W, NE, NW, SE, SW, Both)
mainspan
Length of main span, w/ conversions
number_spans
Number of spans or arches
piers_in_water
Number of piers standing in a river or other water in normal conditions
load
Load limit of the bridge, w/ conversions
clearance_above
Clearance on top of the bridge, if proper
clearance_below
Clearance beneath the bridge
life
Design life of the bridge in years
architect
Those responsible for the conceptual design of the bridge - to be used when engineering/construction design was done by another party
designer
Bridge designer/architect (e.g. Isambard Kingdom Brunel)
contracted_designer
The lead designer at the contract/post competition phase
winner
The winner/s of the design competition phase
engineering
The person or organization that did the engineering/construction design, where that differs from 'designer' above
builder
Construction company or bridge builder
fabricator
Steel fabricator
begin
Construction begin
complete
Construction end
cost
Total project cost
open
Opening date, use {{Start date}}
inaugurated
the date the bridge is ceremonially opened
rebuilt
Date of major rebuild
collapsed
If collapsed, then date of collapse, don't use closed - closure is assumed
closed
Closing date
replaces
The bridge or ferry services that this bridge made redundant
traffic
Average Daily Traffic value
toll
Price of the toll (if a toll bridge)
map_type
The name of a locator map; see Template:Location map#Available maps for a complete listing f options. This parameter is mutually exclusive with |map_image=.
map_relief
Whether to display a relief map with |map_type=; defaults to yes.
map_image
Filename of map image of bridge
map_alt
Alt text for map image (see WP:ALT)
map_caption
Caption for the locator or image map
extra
Spare field for modules, e.g. {{Infobox designation list}}

Map and coordinates

It's usually not necessary to use the coordinates= parameter.

  • The latitude and longitude of the bridge may be specified:
    • in decimal degrees, using lat= and long= OR
    • in degrees/minutes/seconds, using latd=, latm=, lats=, latNS=, longd=, longm=, longs=, and longEW=.
  • To suppress the display coordinates at the top of the page, set coordinates_display=inline.
  • The ISO 3166-1 alpha-2 or ISO 3166-2 region code can set using the coordinates_region= parameter.

One advantage of omitting the coordinates= parameter is that you can display a {{Location map}} without duplicating coordinates.

{{Infobox bridge
...
| latd   = <!-- ''latitude'' degrees -->
| latm   = <!-- ''latitude'' minutes -->
| lats   = <!-- ''latitude'' seconds -->
| latNS  = <!-- latitude: S=south, N=north (default) -->
| longd  = <!-- ''longitude'' degrees -->
| longm  = <!-- ''longitude'' minutes -->
| longs  = <!-- ''longitude'' seconds -->
| longEW = <!-- longitude: W=west, E=east (default) -->
| coordinates_display = <!-- non-blank to display coordinates at the top of the page. -->
| coordinates_region  = <!-- coordinates region code. -->
| map_type            = <!-- Location name used for Template:Location map -->
| map_relief          = yes<!-- Use the relief map, if it exists -->
| map_alt             = <!-- Alternative text for map image, see WP:ALT for details -->
| map_caption         = <!-- Text to be displayed below map; for no caption enter "map_caption="; if the parameter is omitted then the caption will be "Marker text (location map name)" -->
...
}}
Parameters to specify coordinates in degrees, minutes, and seconds of arc:
{{Infobox bridge
...
| latd   = <!-- ''latitude'' degrees -->
| latm   = <!-- ''latitude'' minutes -->
| lats   = <!-- ''latitude'' seconds -->
| latNS  = <!-- latitude: S=south, N=north (default) -->
| longd  = <!-- ''longitude'' degrees -->
| longm  = <!-- ''longitude'' minutes -->
| longs  = <!-- ''longitude'' seconds -->
| longEW = <!-- longitude: W=west, E=east (default) -->
...
}}
Parameters to specify coordinates in decimal degrees:
{{Infobox bridge
...
| lat  = <!-- ''latitude'' (decimal format; enter negative numbers for southern latitude) -->
| long = <!-- ''longitude'' (decimal format; enter negative numbers for western longitude) --> 
...
}}

Note: coordinates in decimal degrees are sensitive to extra whitespace in the parameters:

  • Incorrect: | long = - 123.45
  • Correct: | long = -123.45

Example

{{Infobox bridge
| name        = Sydney Harbour Bridge
| image       = Sydney Harbour Bridge from Circular Quay.jpg
| carries     = Trains, Motor vehicles, pedestrians and bicycles
| crosses     = [[Port Jackson]]
| locale      = [[Sydney]], [[New South Wales]], Australia
| design      = [[Through arch bridge]]
| length      = {{Convert|1149|m|ft|0|abbr=on}}
| width       = {{Convert|49|m|ft|0|abbr=on}}
| height      = {{Convert|134|m|ft|0|abbr=on}}
| mainspan    = {{Convert|503|m|ft|0|abbr=on}}
| below       = {{Convert|49|m|ft|0|abbr=on}} at mid-span
| begin       = 28 July 1923
| complete    = 19 January 1932
| open        = {{Start-date|19 March 1932}}
| map_type    = Australia New South Wales
| map_relief  = yes
| latd = 33 | latm = 51 | lats = 08 | latNS = S
| longd= 151| longm= 12 | longs= 38 | longEW= E
| coordinates_region = AU-NSW_type:landmark
| coordinates_display = inline
}}

Microformat

The HTML mark up produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Sub-templates

If the place or venue has an "established", "founded", "opened" or similar date, use {{start date}} unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes

hCard uses HTML classes including:

  • adr
  • agent
  • category
  • county-name
  • extended-address
  • fn
  • label
  • locality
  • nickname
  • note
  • org
  • region
  • street-address
  • uid
  • url
  • vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

  • geo
  • latitude
  • longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter. A typical 4-lane bridge (25m wide) requires 0.1 second or 0.0001° of precision.

See also

Hidden tracking/maintenance categories