Дидани манбаъи Шаблон:Convert/show3/doc

{{Documentation subpage}}
<!-- Categories and interwikis go at the bottom of this page. -->
{| width=750px style="background:transparent;"
| The converter [[Template:Convert/show3]] will convert an amount to any 2 output units and display the results with special formatting. To set the rounding precision, the output unit must be specified, or put "0" to default.
:'''Usage''': &nbsp; &nbsp; {&#123;convert/show3 |100.51432|m|ft|yd|r1=1}}
::::{&#123;convert/show3 |1,234|km|mi|yd|ft|comma=off}}
::::{&#123;convert/show3 |10.5|L|usgal|impgal|impqt|3|x3=exactly}}
::::{&#123;convert/show3 |7|km|mi|yd|ft|disp=x|long (|)}} - custom output
There are special options with Convert/show3, such as r1=2 to round the input amount to 2 decimals, comma=out to show commas only in the output amount, near=25 (or 50) to round to nearest 25, and x1=xx to x8=xx to insert text before/after the unit names.
<pre style="width:440px">
       12,340 kilometres (7,670 miles; 2,556.7 leagues)
             |          | |    |     | |      |       |
            x1         x2 x3   x4   x5 x6     x7     x8
</pre>
While parameter x1 inserts text after the first amount, x2 follows the input unit, x3 puts text before the 1st output amount (such as "~"), x4 follows the 1st output amount, and x5 follows the 1st output unit, then x6 puts text before the 2nd output amount ("~"), x7 follows the 2nd output amount, and x8 follows the 2nd output unit.

The template allows the same parameters as [[Template:Convert]], and so it allows abbreviation abbr=in or abbr=out or abbr=off, wikilinks lk=in or lk=out, and adjective mode adj=on or adj=mid. The separator can also be a semicolon: disp=semi, disp=or, disp=comma, disp=x (customized), disp=sqbr (square brackets), disp=b (default as parentheses), disp=2 (or disp=out) and disp=# (or disp=number).

===Examples===
The examples show various options of conversions:
* {&#123;convert/show3 |89|km|mi|yd|league|comma=off}} → {{convert/show3 |89|km|mi|yd|league|comma=off}}
* {&#123;convert/show3 |950|km|mi|yd|ft|abbr=~}}{{ns}} → {{convert/show3 |950|km|mi|yd|ft|abbr=~}}
* {&#123;convert/show3 |3.1415926|km|mi|yd|ft|r1=2}}{{pad|1em}}→ {{convert/show3 |3.1415926|km|mi|yd|ft|r1=2}}
* {&#123;convert/show3 |9,564|km|mi|yd|ft|comma=out}} {{ns}} → {{convert/show3 |9,564|km|mi|yd|ft|comma=out}}
* {&#123;convert/show3 |9,564|km|mi|yd|ft|lk=in|near=5}} {{ns}}→ {{convert/show3 |9,564|km|mi|yd|ft|lk=in|near=5}}
* {&#123;convert/show3 |9,564|km|mi|yd|ft|lk=out|near=50}} → {{convert/show3 |9,564|km|mi|yd|ft|lk=out|near=50}}
* {&#123;convert/show3 |10.5|L|usgal|impgal|impqt|4|x3=exactly}} → {{convert/show3 |10.5|L|usgal|impgal|impqt|4|x3=exactly}}

Display types: disp=comma, disp=semi, disp=or, disp=out, disp=number, disp=x and disp=b. The numeric results are identical to using Template:Convert to show numerals instead of words.

===Common problems===
Note the name of this template is "convert/show3" and omitting the suffix "/show3" will not show special formatting. Also, putting "dual" as parameter 1 will cause the number to be treated as a template name "Convert/<number>" such as {&#123;convert|dual|34|km}} will show "{{convert|dual|34|km}}".

The amount is followed by a unit-code (such as "|m") as the 2nd parameter. The output unit-code can be "0" as the 3rd parameter, to allow the default output unit to be triggered, while setting parameter 5 to a rounding precision (such as "|3") or use r=3 to set the rounding level.

== See also ==
* [[Template:Convert/flip]] - convert amount with the result flipped as input
* [[Template:Convert/2]] - convert a range of 2 amounts, with any separator
* [[Template:Convert/3]] - convert 3 amounts, with any separators
* [[Template:Convert/4]] - convert 4 amounts, with any separators
|}
<includeonly><!-- Categories and interwikis go here: -->
[[Гурӯҳ:Subtemplates of Template Convert]]
</includeonly>