Шаблон:Convert

Мавод аз Википедиа — донишномаи озод
Jump to navigation Jump to search
[вироиш] Template-info.svg Ҳуҷҷатҳои шаблон
Information.svg Ҳуҷҷатҳо

Template {{convert}} calculates measurements from one unit (you can enter) to another one, and then presents the results. For example:

{{convert|2|km|mi}} → 2 километр (1.2 mi)
{{convert|7|mi|km}} → 7 miles (11 км)

Units to convert[вироиш]

Enter units to convert:

  • {{convert|1|lb|kg}} → 1 pound (0.45 кg)
  • Units are listed below.

Unit name or symbol (abbreviation): 1 pound or 1 lb?[вироиш]

By default, the first value shows unit name spelled out, the second the symbol (or abbreviation). Use |abbr=on/off to change this behaviour:

  • {{convert|1|lb|kg}} → 1 pound (0.45 кg)

To abbreviate both:

  • {{convert|1|lb|kg|abbr=on}} → 1 lb (0.45 кg)
  • {{convert|1|lb|kg|abbr=off}} → 1 pound (0.45 килоgrams)

|abbr=in is the reverse behaviour to the default, |abbr=out:

  • {{convert|1|lb|kg|abbr=in}} → 1 lb (0.45 килоgrams)

When using scientific notation, the default is for the second (converted) value to display with scientific notation:

  • {{convert|100|e6mi|e6km}} → 100 million miles (160×10^6 км)

To display thousands, millions, etc., while abbreviating both input and output units use |abbr=unit:

  • {{convert|100|e6mi|e6km|abbr=unit}} → 100 million mi (160 million км)

Convenience: {{cvt}} has |abbr=on by default[вироиш]

Template {{cvt}} is similar to {{convert}}, but has |abbr=on as the default behaviour. In {{cvt}}, all other options are available. So:

{{cvt|1|lb|kg}} → 1 lb (0.45 кg)

is equal to:

{{convert|1|lb|kg|abbr=on}} → 1 lb (0.45 кg)

Adjective: a 10-mile distance[вироиш]

Use |adj=on to produce the adjective form:

  • A {{convert|10|mi|km|adj=on}} distance → A 10-mile (16 км) distance.

Default behaviour, for comparison:

  • {{convert|10|mi|km}} to go → 10 miles (16 км) to go.

This option does not work with |abbr=on.

Rounding: 100 ft is 30 m or 30.5 m or 30.48 m?[вироиш]

By definition, 100 ft equals 30.48 м. In practical use, it is common to round the calculated metric number. With that, there are several possibilities.

Default rounding[вироиш]

By {{Convert}} default, the conversion result will be rounded either to precision comparable to that of the input value (the number of digits after the decimal point—or the negative of the number of non-significant zeroes before the point—is increased by one if the conversion is a multiplication by a number between 0.02 and 0.2, remains the same if the factor is between 0.2 and 2, is decreased by 1 if it is between 2 and 20, and so on) or to two significant figures, whichever is more precise. An exception to this is rounding temperatures (see below).

Examples of rounding
Input Displays as Note
{{convert|123|ft|m|-1}} 123 фут (40 м)
{{convert|123|ft|m}} 123 фут (37 м) same output as with 0 (below)
{{convert|123|ft|m|0}} 123 фут (37 м)
{{convert|123|ft|m|1}} 123 фут (37.5 м)
{{convert|123|ft|m|2}} 123 фут (37.49 м) exact value is 37.4904 m
{{convert|500|ft|m|-1}} 500 фут (150 м)
{{convert|500|ft|m}} 500 фут (150 м) same output as with -1 (above)
{{convert|500|ft|m|0}} 500 фут (152 м)
{{convert|500|ft|m|1}} 500 фут (152.4 м)
{{convert|500|ft|m|2}} 500 фут (152.40 м) exact value is 152.4 m

Convert supports four types of rounding:

Round to a given precision: use a precision number[вироиш]

Specify the desired precision with the fourth unnamed parameter (or third unnamed parameter if the "convert to" parameter is omitted; or fifth unnamed parameter if a range is specified; or fourth unnamed parameter again if a range is specified and the "convert to" parameter is omitted; needs to be replaced with a "precision" named parameter). The conversion is rounded off to the nearest multiple of 110 to the power of this number. For instance, if the result is 8621 and the round number is "-2", the result will be 8600. If the result is "234.0283043" and the round number is "0", the result will be 234.

Round to a given number of significant figures: |sigfig=[вироиш]

To specify the output number to be with n significant figures use |sigfig=<number>:

  • {{convert|1200|ft|m|sigfig=4}} → 1,200 фут (365.8 м)
  • {{convert|1200|ft|m|sigfig=3}} → 1,200 фут (366 м)
  • {{convert|1200|ft|m|sigfig=2}} → 1,200 фут (370 м)
  • {{convert|1200|ft|m|sigfig=1}} → 1,200 фут (400 м)

Default behaviour, for comparison:

  • {{convert|1200|ft|m}} → 1,200 фут (370 м)

Setting |sigfig= is meaningless

  • {{convert|1200|ft|m|sigfig=0}} → 1,200 фут (370 м)*

Round to a multiple of 5: 15, 20, 25, ...[вироиш]

Using |round=5 rounds the outcome to a multiple of 5.

  • {{convert|10|m|ft}} → 10 метр (33 ft)
  • {{convert|10|m|ft|round=5}} → 10 метр (35 ft)

Similar: using |round=25 rounds the outcome to a multiple of 25.

  • {{convert|10|m|ft}} → 10 метр (33 ft)
  • {{convert|10|m|ft|round=25}} → 10 метр (25 ft)

Default behaviour, for comparison:

  • {{convert|10|m|ft|sigfig=4}} → 10 метр (32.81 ft)

In a range, one can round each value individually to the default. Use |round=each:

  • {{convert|10 x 200 x 3000|m|ft}} → 10 by 200 by 3,000 метр (33 ft × 656 ft × 9,843 ft)
  • {{convert|10 x 200 x 3000|m|ft|round=each}} → 10 by 200 by 3,000 метр (33 ft × 660 ft × 9,800 ft)

Round to a multiple of a given fraction: 2 316 inch[вироиш]

Specify the desired denominator using |frac=<some positive integer>. (Denominator is the below-the-slash number, for example the 3 in 13).

  • {{convert|5.56|cm|in|frac=16}} → 5.56 сантиметр (2 316 in)
  • {{convert|8|cm|in|frac=4}} → 8 сантиметр (3 14 in)

The fraction is reduced when possible:

  • {{convert|8|cm|in|frac=100}} → 8 сантиметр (3 320 in)

Default behaviour, for comparison:

  • {{convert|8|cm|in}} → 8 сантиметр (3.150 in)

In temperatures: rounding °C, °F and K[вироиш]

In temperatures, the conversion will be rounded either to precision comparable to that of the input value or to that which would give three significant figures when expressed in kelvins, whichever is more precise.

  1. {{convert|10,000|C|F K}} → 10,000 °C (18,000 °F; 10,300 K)
  2. {{convert|10,000.1|C|F K}} → 10,000.1 °C (18,032.2 °F; 10,273.2 K)
  3. {{convert|-272|C|F K}} → −272 °C (−457.60 °F; 1.15 K)
  4. {{convert|-272|C}} → −272 °C (−457.60 °F)
  5. {{convert|-300|C|F K}} → −300 °C (−508.0 °F; −26.9 K)
  6. {{convert|0|C|F K}} → 0 °C (32 °F; 273 K)

The precision of the input number in example (1) is one digit, but the precision of its Kelvins expression is three, so the precision of the Fahrenheit conversion is made three (made 180...) . (1) and (2) seem to belie the fact that a 0.1 degrees Celsius change is a 0.18 degrees Fahrenheit change, and make the 32 degrees difference shown in (1) begin to seem off somehow. Result (1) seems off until you set the significant figures yourself with |sigfig=:

{{convert|10000|C|sigfig=5}} → 10,000 °C (18,032 °F)

or you set the precision positionally, relative to the decimal point (zero being at the decimal point):

{{convert|10000|C|0}} → 10,000 °C (18,032 °F)

The precision of the input number in example (2) is six, so the precision of the Fahrenheit output is, whereas before, Kelvins had determined it to be three. Examples (3) and (4) show how this can be hidden and generate questions, but it occurs there because the Kelvins conversion generated two fractional parts. (Before it was the input number that generated the fractional part.) In example (3) the three input digits converted into five significant output digits because of the two digits after the decimal point, generated by the Kelvins conversion. This happened again in (5), but in (6) decimal fractions were neither given as input nor induced by the Kelvins conversion.

Into multiple units: 10 °C (50 °F; 283 K)[вироиш]

Separate the multiple output units by a space:

  • {{convert|10|C|F K}} → 10 °C (50 °F; 283 K)
  • {{convert|5|km|mi nmi}} → 5 километр (3.1 mi; 2.7 nmi)

If the output unit names contain spaces, use + as the separator.

See also:

Ranges of values[вироиш]

A range converts two values and separates them by your choice of words and punctuation.

A range: 6 to 17 kg (13 to 37 lb)[вироиш]

Range indicators are entered as the second parameter (between the values). Range separators can be:

Range separators in {{convert}}
Separator Convert Result Notes
- {{convert|3|-|6|ft}} 3–6 фут (0.91–1.83 м) Input can be hyphen (-) or en dash (–), output uses en dashes
- &ndash;(en dash) {{convert|3|–|6|ft}} 3–6 фут (0.91–1.83 м)
and {{convert|3|and|6|ft}} 3 and 6 фут (0.91 and 1.83 м)
and&& {{convert|3|&|6|ft}} 3 and 6 фут (0.91 and 1.83 м) Same as and
and(-) {{convert|3|and(-)|6|ft}} 3 and 6 фут (0.91–1.83 м) |abbr=on alters the punctuation
and(-)|abbr=on {{convert|3|and(-)|6|ft|abbr=on}} 3 and 6 ft (0.91–1.83 м)
or {{convert|3|or|6|ft}} 3 or 6 фут (0.91 or 1.83 м)
to {{convert|3|to|6|ft}} 3 to 6 фут (0.91 to 1.83 м)
to(-) {{convert|3|to(-)|6|ft}} 3 to 6 фут (0.91–1.83 м) |abbr=on alters the punctuation
to(-)|abbr=on {{convert|3|to(-)|6|ft|abbr=on}} 3 to 6 ft (0.91–1.83 м)
to about {{convert|3|to about|6|ft}} 3 to about 6 фут (0.91 to about 1.83 м)
+/- {{convert|3|+/-|6|ft}} 3 ± 6 фут (0.91 ± 1.83 м)
+/-± &plusmn; {{convert|3|±|6|ft}} 3 ± 6 фут (0.91 ± 1.83 м)
+ {{convert|3|+|6|ft}} 3 + 6 фут (0.91 + 1.83 м)
, {{convert|3|,|6|ft}} 3, 6 фут (0.91, 1.83 м)
, and {{convert|3|, and|6|ft}} 3, and 6 фут (0.91, and 1.83 м)
, or {{convert|3|, or|6|ft}} 3, or 6 фут (0.91, or 1.83 м)
by {{convert|3|by|6|ft}} 3 by 6 фут (0.91 by 1.83 м)
x {{convert|3|x|6|ft}} 3 by 6 фут (0.91 м × 1.83 м) Scientific notation.
|abbr=on alters the punctuation
× &times; {{convert|3|×|6|ft}} 3 by 6 фут (0.91 м × 1.83 м)
x|abbr=on {{convert|3|x|6|ft|abbr=on}} 3 ft × 6 ft (0.91 м × 1.83 м)
xx |xx| is deprecated. Use |x| instead
* |*| is deprecated. Use |x| instead
to- |to-| is deprecated. Use |to(-)| instead
& |&| is deprecated. Use |and| instead
abbr=mos |abbr=mos is deprecated. Use |x| or |by| instead


Multiple dimensions: 6 м × 12 м (20 ft × 39 ft)[вироиш]

Use by:

  • {{convert|6|by|12|ft|m}} → 6 by 12 фут (1.8 by 3.7 м)

Use ×, multiplication sign, or x, letter:

  • {{convert|6|x|12|m|ft}} → 6 by 12 метр (20 ft × 39 ft)

In science, the formal way is to set |x| and |abbr=on (keeping dimensions right, like in area = x km2):

  • {{convert|6|x|12|m|ft|abbr=on}} → 6 м × 12 м (20 ft × 39 ft)

About feet, inch in ranges and multiples[вироиш]

While it is possible to enter feet, inch in a simple conversion, this is not possible for ranges:

Default behaviour, for comparison:

  • {{convert|1|ft|3|in|mm}} → 1 фут 3 дюйм (380 мм)

Words[вироиш]

Spelling of unit name: UK metre or US meter?[вироиш]

Default spelling of units is en-UK. To show en-US spelling, use |sp=us:

{{convert|1|m|ft}} → 1 метр (3.3 ft)—default
{{convert|1|m|ft|sp=us}} → 1 metre (3.3 ft)

Spell out numbers: ten miles[вироиш]

To write a number in words, use |spell=in:

  • {{convert|10|mi|m|spell=in}} → ten miles (16,000 м)

To spell out both in and out values, use |spell=on:

  • {{convert|10|mi|m|spell=on}} → ten miles (sixteen thousand метр)

To make first letter a capital, use |spell=In, |spell=On

  • {{convert|10|mi|m|spell=In}} → Ten miles (16,000 м)
  • {{convert|10|mi|m|spell=On}} → Ten miles (sixteen thousand метр)

Remember that the spelling of the units (ft, m) is independently set by |abbr=. To the extreme:

  • {{convert|10|mi|m|spell=on|abbr=off|sp=us}} → ten miles (sixteen thousand metres)

Inserted before units: 4 planted acres[вироиш]

  • {{convert|4|acre||adj=pre|planted}} → 4 planted acres (1.6 ha)

disp=preunit is similar, but has no separator after the specified text, and can have different text for the output value:

  • {{convert|4|acre||disp=preunit|planted }} → 4 planted acres (1.6 planted ha)
  • {{convert|4|acre||disp=preunit|planted |reforested-}} → 4 planted acres (1.6 reforested-ha)

After adjective unit: A 10-фут-long corridor[вироиш]

{{convert|10|ft|m|adj=mid|-long}} → 10-фут-long (3.0 м)

Plurals: 1 inch, 2 inches[вироиш]

The unit symbol is singular always. Depending on the preceding number only, a unit name can be shown plural.

  • {{convert|1|metre}} → 1 метр (3 ft 3 in)
  • {{convert|2|metre}} → 2 метр (6 ft 7 in)
  • {{convert|2|metre|abbr=on}} → 2 м (6 ft 7 in)
Exception

Entering the unit spelled |foot| forces singular output "foot", whatever the number is.

  • {{convert|100|foot|abbr=off}} → 100 фут (30 метр)

Fractions: one-eighth of an imperial pint[вироиш]

The convert template also supports spelling out fractions.

  • {{convert|1/4|oz|g|spell=in}} → one-quarter ounce (7.1 g)

Any additional words needed for the fraction can also be added at the end of the template.

  • {{convert|1/8|imppt|mL|spell=in|adj=pre|of an}} → one-eighth of an imperial pint (71 мL)

Numbers[вироиш]

Using an SI prefix: gigameter (Gm), or micrometer (μm)[вироиш]

Metric prefixes
Text Symbol Factor
yotta Y 1024
zetta Z 1021
exa E 1018
peta P 1015
tera T 1012
giga G 109
mega M 106
kilo k 103
hecto h 102
deca da 101
(none) (none)  1
deci d 10−1
centi c 10−2
milli m 10−3
micro μ 10−6
nano n 10−9
pico p 10−12
femto f 10−15
atto a 10−18
zepto z 10−21
yocto y 10−24

Units can have an SI prefix like G before the unit: Gm, and giga before the name: gigameter. These are plain multiplication factors.

To illustrate, these are trivial calculations (from meter to meter), showing the multiplication factor:

  • 12 Гм (1.2×1010 м)
  • 12 мкм (1.2×10−5 м)

The prefix can be added before the SI unit (here: unit m for meter):

  • {{convert|12|Gm|mi|abbr=on}} → 12 Гм (7,500,000 mi)
  • Mm: 12 Мм (7,500 mi)
  • km: 12 км (39,000 ft)
  • mm: 12 мм (0.47 in)
  • μm: 12 мкм (0.012 мм)
  • um: 12 мкм (0.012 мм) (letter "u" can be used for "μ" here)

The prefix can be used in the output unit:

  • {{convert|12000|mi|Mm|abbr=on}} → 12,000 mi (19 Мм)
  • {{convert|12|in|μm|abbr=on}} → 12 in (300,000 мкм)

As an exception, the non-SI unit "inch" can have the "μ" prefix too)

  • {{convert|12|μm|μin|abbr=on}} → 12 мкм (470 µin)

Engineering notation: 7 × 106 m[вироиш]

In the unit: e6m[вироиш]

Engineering number notations like 7E6 (for 7 × 106) can be entered as a "prefix" to the unit:

  • {{convert|7|e6m}} → 7 million метр (23,000,000 ft)

The same is possible for the output unit:

  • {{convert|23,000,000|ft|e6m}} → 23,000,000 фут (7.0×10^6 м)

Any standard unit (not a combination, multiple, or built-in unit) can have such a prefix:

  • e3 (thousand),
  • e6 (million),
  • e9 (billion),
  • e12 (trillion),
  • e15 (quadrillion).

Scientific notation: 1.23×10−14[вироиш]

In scientific notation, a number is written like Ошибка формата данных: нечисловое входное значение при округлении с заданной точностью. The plain number has exactly one digit before the decimal point.

With {{convert}}, the input can be in e-notation such as 12.3e4. This value is displayed as a power of ten, and the output is displayed in scientific notation, except that an output value satisfying 0.01 <= v < 1000 is shown as a normal number. In addition, if the output value is 1000 and sigfig=4 is used, the value is displayed as a normal number.

  • {{convert|12.3e-15|atm|atm|abbr=on}} → 12.3×10−15 atm (1.23×10−14 atm)
  • {{convert|0.00000005|atm|atm|abbr=on}} → 0.00000005 atm (5.0×10−8 atm)

Input with fractions: 1 12 дюйм (38.1 мм)[вироиш]

The number to convert can be written in fractions. Both / (keyboard slash) and (fraction slash) are accepted:

  • {{convert|1/2|in|mm|1}}12 дюйм (12.7 мм)
  • {{convert|1⁄2|in|mm|1}}12 дюйм (12.7 мм)

With integers, use a + sign

  • {{convert|2+1⁄2|in|mm|1}}2 12 дюйм (63.5 мм)

When negative, use a hyphen - and repeat it:

  • {{convert|-2-1⁄2|in|mm|1}}−2 12 дюйм (−63.5 мм)
  • {{convert|2-1⁄2|in|mm|1}} → 2–12 дюйм (50.8–12.7 мм) Note: this is read as a range
  • {{convert|-2+1⁄2|in|mm|1}}[convert: invalid number] Red XN Should be a number, not an expression (do not require a calculation)

Output with horizontal fraction bar in: 1/2 inch[вироиш]

Using a double slash (//) returns a horizontal bar fraction:

  • {{convert|1//2|in|mm|1}}1/2 дюйм (12.7 мм)
  • {{convert|2+1//2|in|mm|1}}2 1/2 дюйм (63.5 мм)

Thousands separator: 1,000 mi or 1000 mi[вироиш]

In input, a comma for thousands separator is accepted but not required; a gap (space) is not accepted. In output, by default, the thousand separator is the comma:

  • {{convert|1234567|m|ft}} → 1,234,567 метр (4,050,417 ft)
  • {{convert|1,234,567|m|ft}} → 1,234,567 метр (4,050,417 ft)
  • {{convert|1 234 567|m|ft}}[convert: invalid number] Red XN

Set |comma=off to remove the separator from the output:

  • {{convert|1234567|m|ft|comma=off}} → 1234567 метр (4050417 ft)

Use |comma=gaps to use digit grouping by gap (thin space) as a thousands separator:

  • {{convert|1234567|m|ft|comma=gaps}}1234567 метр (4050417 ft)

Default behaviour, for comparison:

  • {{convert|1234567|m|ft}} → 1,234,567 метр (4,050,417 ft)

Setting |comma=5 or |comma=gaps5 will only add the separator when the number of digits is 5 or more:

  • {{convert|1234|m|ft|comma=5}} → 1234 метр (4049 ft)
  • {{convert|1234567|m|ft|comma=5}} → 1,234,567 метр (4,050,417 ft)
  • {{convert|1234|m|ft|comma=gaps5}}1234 метр (4049 ft)*
  • {{convert|1234567|m|ft|comma=gaps5}}1234567 метр (4050417 ft)*

Default behaviour, for comparison:

  • {{convert|1234|m|ft}} → 1,234 метр (4,049 ft)

Output manipulation[вироиш]

Brackets and separators: 10 m [33 ft][вироиш]

Punctuation that distinguishes the two measurements is set by |disp=.
Options are: b (the default), sqbr, comma, or, br, x|…:

  • {{convert|10|m|ft|disp=sqbr}} → 10 метр [33 ft]
  • {{convert|10|m|ft|disp=comma}} → 10 метр, 33 ft
  • {{convert|10|m|ft|disp=or}} → 10 метр or 33 фут

Default behaviour, for comparison:

  • {{convert|10|m|ft}} → 10 метр (33 ft)

Setting |disp=br will force a new line (<br/>)

  • {{convert|10|m|ft|disp=br}} → 10 метр
    33 фут

Also |disp=br() will force a new line, and keep the brackets:

  • {{convert|10|m|ft|disp=br()}} → 10 метр
    (33 фут)

Setting |disp=x|… allows any text as separator:

  • {{convert|10|m|ft|disp=x|_MyText_}} → 10 метр_MyText_33 ft—(To display spaces, use &nbsp;)

Flipping (reordering) the two measurements: 1,609.3 метр (1 mile)[вироиш]

Setting |order=flip will flip (swap) the two measurements:

  • {{convert|1|mi|m|order=flip}} → 1,609.3 метр (1 mile)

Default behaviour, for comparison:

  • {{convert|1|mi|m}} → 1 mile (1,609.3 метр)

When converting to multiple units, the effect is:

  • {{convert|10|km|mi nmi|order=flip}} → 6.2137 miles; 5.3996 nautical miles (10 километр)
  • {{convert|10|km|nmi mi|order=flip}} → 5.3996 nautical miles; 6.2137 miles (10 километр)

Displaying parts of the result: 2 (1.5)[вироиш]

It is possible to display only parts of the conversion result:

Convert Output Description
{{convert|2|cuyd|m3}} 2 cubic yards (1.5 m3) Default behaviour, for comparison
{{convert|2|cuyd|m3|abbr=values}} 2 (1.5) Input and output numbers
{{convert|2|cuyd|m3|disp=unit}} cubic yards Input unit
{{convert|2|cuyd|m3|disp=unit|adj=on}} cubic-yard Input unit, adjective (hyphenated)
{{convert|2|cuyd|cuyd|0|disp=out|abbr=off}} 2 cubic yards Input (workaround)
{{convert|2|cuyd|m3|abbr=~}} 2 cubic yards [cu yd] (1.5 m3) Input: both name and symbol
{{convert|2|cuyd|m3|disp=unit2}} m3 Output unit (symbol)
{{convert|2|cuyd|m3|disp=unit2|abbr=off}} cubic metres Output unit (name)
{{convert|2|cuyd|m3|disp=number}} 1.5 Output value
{{convert|2|cuyd|m3|disp=out}} 1.5 m3 Output value and unit
{{convert|2|cuyd|m3|disp=out|abbr=off}} 1.5 cubic metres Output value and unit

Display both input name and symbol: 2 kilopascals [kPa][вироиш]

Setting |abbr=~ returns both name and symbol of the first (input) unit:

  • {{convert|2|kPa|psi|abbr=~}} → 2 килоpascals [кPa] (0.29 psi)
  • A {{convert|2|kPa|psi|abbr=~|adj=on}} pressureA 2-килоpascal [кPa] (0.29 psi) pressure

Table options[вироиш]

For the wikitable structure, there are three options: add a line-break, split the result over columns and make the table sortable.

Enforced line break[вироиш]

|disp=br adds a line-break and omits brackets.

|disp=br() adds a line-break and does add brackets to the converted value. This may be useful in tables:

|disp=br |disp=br()
100 километр
62 miles
100 километр
(62 miles)

Table columns showing numbers only[вироиш]

Using {convert} in a table cell, with |disp=table splits the result over two columns:

{{convert|10|m|ft|disp=table}}
style="text-align:right;"|10

|style="text-align:right;"|33

|disp=tablecen does the same, and also centers the text:

{{convert|20|m|ft|disp=tablecen}}
style="text-align:center;"|20

|style="text-align:center;"|66

The units are added as a column header:

  m ft
|disp=table 10 33
|disp=tablecen 20 66
|disp=<other> (default) 30 метр (98 ft)

Sorting[вироиш]

Use |sortable=on to include a hidden numerical sortkey in the output, suitable for use in a table with sortable columns. Technically, this places a hidden string before the actual displayed values:

{{convert|10|m|ft|sortable=on}} → <span style="display:none">7001100000000000000</span>10 metres (33&nbsp;ft)

Use both |disp=table and |sortable=on together to produce table columns (pipe symbols) for each value in sortable columns:

m ft
A 15 34 52
B 15.5 51
C 16.0 52.5
D 16 52

The generated sortkey is calculated in a consistent way based on both the value and its unit as passed to the convert template. In most cases convert uses the passed value converted to SI base units. It is therefore not necessarily the displayed value or other alternate units and is calculated regardless of output format options. Using different units or different order of units in individual rows should therefore not lead to incorrect sorting, although variations in rounding can give surprising results, since an unrounded number is used for the sortkey.

Units[вироиш]

All units[вироиш]

The table below lists units supported by template {{convert}}. The list is not complete—more complete lists are linked for each dimension. A complete list is at the full list of units.

Explanation - unit codes

The {{convert}} template uses unit-codes, which are similar to (but not necessarily exactly the same as) the usual written abbreviation for a given unit. These 'unit-codes' are given in column 3 of the following tables, and are accepted as input by the {{convert}} template as the second and third unnamed parameters. For example, {{convert|100|kg|lb}} produces "100 килоgrams (220 lb)" and {{convert|100|lb|kg}} produces "100 pounds (45 кg)"

Some units have alternative unit-codes; these are shown in brackets in column 3, e.g. °F (F): either may be entered for Fahrenheit (but not lower-case f).

The unit-codes should be treated as case-sensitive, especially in cases like {{convert|100|Mm|mm}}, which produces "100 мегаметр (1.0×1011 мм)".

The output of {{convert}} can display multiple converted units, if further unit-codes are specified after the second unnamed parameter (without the | separator). Typical combination output units are listed below in column 7. For example, {{convert|55|nmi|km mi}} produces "55 nautical miles (102 км; 63 mi)", and {{convert|1|oz|ozt g gr}} produces "1 ounce (0.91 ozt; 28 g; 440 gr)".

Abridged list of units supported by {{Convert}}

Explanation
system unit unit-
code
symbol or
abbrev.
notes sample default
conversion
combination
output units
the system(s) to which the unit belongs units listed by name unit-code to use in template symbols shown in output other notes about the units sample of the default conversion for the unit output codes for multiple conversions

AREA
(Full list)
system unit unit-
code
abbrev-
iation
notes sample default
conversion
combination
output units
SI square килоmetre km2 кm2 US spelling: square kilometer
1.0 кm2 (11,000,000 sq ft)
  • km2 sqmi
square metre m2 m2 US spelling: square meter
1.0 m2 (11 sq ft)
  • m2 sqft
square сантиmetre cm2 сm2 US spelling: square centimeter
1.0 сm2 (0.0011 sq ft)
  • cm2 sqin
square миллиmetre mm2 мm2 US spelling: square millimeter
1.0 мm2 (1.1×10−5 sq ft)
  • mm2 sqin
non-SI metric hectare ha ha 1.0 ha (2.5 acres)
Imperial
&
US customary
square mile sqmi sq mi 1.0 sq mi (2.6 кm2)
  • sqmi km2
acre acre (none) 1.0 acre (0.40 ha)
square yard sqyd sq yd 1.0 sq yd (0.84 m2)
square foot sqft
(sqfoot)
sq ft long code "sqfoot" outputs square foot (and never feet) 1.0 sq ft (0.093 m2)
  • sqft m2 (sqfoot m2)
square inch sqin sq in 1.0 sq in (6.5 сm2)
  • sqin cm2
Other square nautical mile sqnmi sq nmi 1.0 sq nmi (3.4 кm2; 1.3 sq mi)
dunam dunam (none) For alternative spellings and definitions see the full list 1.0 dunam (0.0010 кm2; 0.00039 sq mi)
tsubo tsubo (none) 1.0 tsubo (3.3 m2)

DENSITY
(Full list)
system unit unit-
code
abbrev-
iation
notes sample default
conversion
combination
output units
Metric kilogram per cubic metre kg/m3 kg/m3 1.0 kg/m3 (1.7 lb/cu yd)
  • kg/m3 lb/ft3 (kg/m3 lb/cuft)
  • kg/m3 lb/yd3 (kg/m3 lb/cuyd)
gram per cubic metre g/m3 g/m3 1.0 g/m3 (0.0017 lb/cu yd)
  • g/m3 kg/m3
  • g/m3 lb/ft3 (g/cm3 lb/cuft)
  • g/m3 lb/yd3 (g/cm3 lb/cuyd)
Imperial
&
US customary
pound per cubic foot lb/ft3 lb/cu ft 1.0 lb/cu ft (0.016 g/сm3)
  • lb/ft3 kg/m3 (lb/cu ft g/m3)
  • lb/ft3 g/m3 (lb/cu ft g/m3)
pound per cubic yard lb/yd3 lb/cu yd 1.0 lb/cu yd (0.59 kg/m3)
  • lb/yd3 kg/m3 (lb/cuyd kg/m3)
  • lb/yd3 g/m3 (lb/cuyd g/m3)

ENERGY
(Full list)
system unit unit-
code
abbrev-
iation
notes sample default
conversion
combination
output units
SI гигаjoule GJ ГJ 1.0 ГJ (240,000,000 cal)
мегаjoule MJ МJ 1.0 МJ (240,000 cal)
килоjoule kJ кJ 1.0 кJ (240 cal)
гектоjoule hJ гJ 1.0 гJ (24 cal)
декаjoule daJ даJ 1.0 даJ (2.4 cal)
joule J J 1.0 J (0.24 cal)
детсиjoule dJ дJ 1.0 дJ (0.024 cal)
сантиjoule cJ сJ 1.0 сJ (0.0024 cal)
миллиjoule mJ мJ 1.0 мJ (0.00024 cal)
микроjoule µJ (uJ) мкJ 1.0 мкJ (2.4×10−7 cal)
наноjoule nJ нJ 1.0 нJ (2.4×10−10 cal)
cgs megaerg Merg Merg 1.0 Merg (0.10 J)
kiloerg kerg kerg 1.0 kerg (0.10 мJ)
erg erg (none) 1.0 erg (0.10 мкJ)
Watt-hour multiples terawatt-hour TWh TWh 1.0 TWh (3.6 ПJ)
TW.h TW·h
gigawatt-hour GWh GWh 1.0 GWh (3.6 ТJ)
GW.h GW·h
megawatt-hour MWh MWh 1.0 MWh (3.6 ГJ)
MW.h MW·h
kilowatt-hour kWh kWh 1.0 kWh (3.6 МJ)
kW.h kW·h
watt-hour Wh Wh 1.0 Wh (3.6 кJ)
W.h W·h
Electron-
volt
multiples
gigaelectronvolt GeV GeV 1.0 GeV (0.16 нJ)
megaelectronvolt MeV MeV 1.0 MeV (0.16 пJ)
kiloelectronvolt keV keV 1.0 keV (0.16 фJ)
electronvolt eV eV 1.0 eV (0.16 аJ)
millielectronvolt meV meV 1.0 meV (0.16 зJ)
Calorie multiples calorie Cal Cal The thermo-chemical calorie is the default definition. For others, see the full list. 1.0 Cal (4.2 кJ)
megacalorie Mcal Mcal 1.0 Mcal (4.2 МJ)
kilocalorie kcal kcal 1.0 kcal (4.2 кJ)
calorie cal cal 1.0 cal (4.2 J)
millicalorie mcal mcal 1.0 mcal (4.2 мJ)
pound/
ounce
-foot/
inch-hour-minute-second
foot-poundal ftpdl ft·pdl 1.0 ft·pdl (0.042 J)
foot-pound force ftlbf ft·lbf 1.0 ft·lbf (1.4 J)
ftlb-f ft·lbf
inch-pound force inlbf in·lbf 1.0 in·lbf (110 мJ)
inlb-f in·lbf
inch-ounce force inozf in·ozf 1.0 in·ozf (7.1 мJ)
inoz-f in·ozf
horsepower-hour hph hp·h 1.0 hp·h (0.75 kWh)
British thermal unit British thermal unit Btu Btu The International Steam Table British thermal unit is used. For others, see the full list. 1.0 Btu (1.1 кJ)
BTU BTU
TNT-based units gigatonne of TNT GtTNT (none) 1.0 gigatonne of TNT (4.2 ЭJ)
gigaton of TNT GtonTNT (none)
megatonne of TNT MtTNT (none) 1.0 megatonne of TNT (4.2 ПJ)
megaton of TNT MtonTNT Mt
kilotonne of TNT ktTNT (none) 1.0 kilotonne of TNT (4.2 ТJ)
kiloton of TNT ktonTNT kt
tonne of TNT tTNT (none) 1.0 tonne of TNT (4.2 ГJ)
ton of TNT tonTNT (none)
Other
Hartree Eh Eh 1.0 Eh (27 eV)
rydberg Ry Ry 1.0 Ry (14 eV)
tonne of oil equivalent toe toe 1.0 toe (42 ГJ)
barrel of oil equivalent BOE BOE 1.0 BOE (6.1 ГJ)
cubic foot of natural gas cuftnaturalgas (cufootnaturalgas) Unit-code cufootnaturalgas will show "cubic foot of natural gas" if plural. 1.0 cubic foot of natural gas (1.1 МJ)
litre-atmosphere latm l·atm 1.0 l·atm (100 J)
Latm L·atm
imperial gallon-atmosphere impgalatm imp gal·atm 1.0 imp gal·atm (460 J)
US gallon-atmosphere USgalatm
(usgalatm)
US gal·atm 1.0 US gal·atm (380 J)
U.S.galatm
(usgalatm)
U.S. gal·atm

FORCE
(Full list)
system unit unit-
code
abbrev-
iation
notes sample default
conversion
combination
output units
SI гигаnewton GN ГN Allows triple output units. See: full list. 1.0 ГN (220,000,000 lbf)
  • GN LT-f
  • GN LTf
  • GN ST-f
  • GN STf
мегаnewton MN МN Allows triple output units. See: full list. 1.0 МN (220,000 lbf)
  • MN LT-f
  • MN LTf
  • MN ST-f
  • MN STf
килоnewton kN кN Allows triple output units. See: full list. 1.0 кN (220 lbf)
  • kN LT-f
  • kN LTf
  • kN ST-f
  • kN STf
newton N N 1.0 N (0.22 lbf)
  • N lb-f
  • N lbf
  • N oz-f
  • N ozf
миллиnewton mN мN 1.0 мN (0.00022 lbf)
  • mN oz-f
  • mN ozf
  • mN gr-f
  • mN grf
микроnewton µN (uN) мкN 1.0 мкN (2.2×10−7 lbf)
  • µN gr-f
  • µN grf
наноnewton nN нN 1.0 нN (2.2×10−10 lbf)
  • nN gr-f
  • nN grf
cgs megadyne Mdyn Mdyn 1.0 Mdyn (2.2 lbf)
kilodyne kdyn kdyn 1.0 kdyn (0.036 ozf)
dyne dyn
(dyne)
dyn 1.0 dyn (0.016 grf)
millidyne mdyn mdyn 1.0 mdyn (1.6×10−5 grf)
Metric gravitational units tonne-force t-f tf 1.0 tf (9.8 кN; 0.98 LTf; 1.1 STf)
tf tf
kilogram-force kg-f kgf 1.0 kgf (9.8 N; 2.2 lbf)
kgf kgf
gram-force g-f gf 1.0 gf (9.8 мN; 0.035 ozf)
gf gf
milligram-force mg-f mgf 1.0 mgf (9.8 мкN; 0.015 grf)
mgf mgf
Avoirdupois-based units poundal pdl pdl 1.0 pdl (0.14 N)
long ton-force LT-f LTf 1.0 LTf (10.0 кN)
  • LT-f ST-f
LTf long ton-force
  • LTf STf
short ton-force ST-f STf 1.0 STf (8.9 кN)
  • ST-f LT-f
STf short ton-force
  • STf LTf
pound-force lb-f lbf 1.0 lbf (4.4 N)
lbf lbf
grain-force gr-f grf 1.0 grf (640 мкN)
grf grf

LENGTH
(Full list)
system unit unit-
code
abbrev-
iation
notes sample default
conversion
combination
output units
SI мегаметр Mm Мм US spelling: megameter
1.0 Мм (3,280,839 ft 11 in)
километр km км US spelling: kilometer
1.0 км (3,280 ft 10 in)
  • km mi
метр m м US spelling: meter
1.0 м (3 ftin)
  • m ft
  • m ftin
сантиметр cm см US spelling: centimeter
1.0 см (0.39 in)
  • cm in
миллиметр mm мм US spelling: millimeter
1.0 мм (0.039 in)
  • mm in
микрометр µm (um) мкм US spelling: micrometer
1.0 мкм (3.9×10−5 in)
нанометр nm нм US spelling: nanometer
1.0 нм (3.9×10−8 in)
non-SI metric ångström Å
(angstrom)
Å 1.0 Å (3.9×10−9 in)
Imperial
&
US customary
mile mi mi 1.0 mi (1.6 км)
  • mi km
furlong furlong (none) 1.0 furlong (660 ft; 200 м)
chain chain (none) 1.0 chain (66 ft; 20 м)
rod rd rd For other names of this unit see the full list. 1.0 rd (17 ft; 5.0 м)
fathom fathom (none) fathom ≡ 6 ft 1.0 fathom (6.0 ft; 1.8 м)
yard yd yd assumes the international definition 1.0 yd (0.91 м)
фут ft (foot) ft long code "foot" outputs foot (and never feet) 1.0 ft (0.30 м)
  • ftin (feet and inches)
  • ft m (foot m)
дюйм in in 1.0 in (25 мм)
  • in cm
  • in mm
Other nautical mile nmi nmi the international standard nautical mile
For other nautical miles see the full list.
1.0 nmi (1.9 км; 1.2 mi)
parsec pc pc 1.0 pc (3.3 ly)
light-year ly ly 1.0 ly (63,000 AU)
astronomical unit AU AU 1.0 AU (150,000,000 км; 93,000,000 mi)

MASS
(Full list)
system unit unit-
code
abbrev-
iation
notes sample default
conversion
combination
output units
SI килоgram kg кg Allows triple output units. See: full list. 1.0 кg (35 oz)
  • kg lb
  • kg st
gram g g 1.0 g (0.035 oz)
  • g oz
миллиgram mg мg 1.0 мg (3.5×10−5 oz)
  • mg gr
микроgram µg (ug) мкg 1.0 мкg (3.5×10−8 oz)
non-SI metric tonne t t Allows triple output units. See: full list. 1.0 t (0.98 long tons; 1.1 short tons)
  • t LT
  • t ST
metric ton MT t
  • MT LT
  • MT ST
Avoirdupois long ton LT (none) 2,240 lb
used mostly in the British Commonwealth.
Allows triple output units. See: full list.
1.0 long ton (1.0 t)
  • LT t
  • LT MT
  • LT ST
long ton long ton
short ton ST (none) 2,000 lb
used mostly in the US.
Allows triple output units. See: full list.
1.0 short ton (0.91 t)
  • ST t
  • ST MT
  • ST LT
short ton short ton
stone st st 14 lb
used mostly in the British Commonwealth except Canada.
Allows triple output units. See: full list.
1.0 st (14 lb; 6.4 кg)
  • st kg
  • st lb
pound lb lb Allows triple output units. See: full list. 1.0 lb (0.45 кg)
  • lb kg
  • lb st
ounce oz oz 1.0 oz (28 g)
  • oz g
drachm drachm (none) 1.0 drachm (1.8 g)
drachm dram (none)
grain gr gr equivalent to the troy grain 1.0 gr (0.065 g)
Troy troy ounce ozt ozt 1.0 ozt (1.1 oz; 31 g)
other carat carat (none) 1.0 carat (0.20 g)

SPEED
(Full list)
system unit unit-
code
abbrev-
iation
notes sample default
conversion
combination
output units
SI metre per second m/s m/s US spelling: meter per second
1.0 m/s (3.3 ft/s)
  • m/s ft/s (m/s foot/s)
non-SI metric kilometre per hour km/h km/h US spelling: kilometer per hour
1.0 km/h (0.62 mph)
  • km/h mph
Imperial
&
US customary
mile per hour mph mph 1.0 mph (1.6 km/h)
  • mph km/h
  • mph kn
foot per second ft/s (foot/s) ft/s long code "foot/s" outputs foot per second (and never feet) 1.0 ft/s (0.30 m/s)
  • ft/s m/s
Maritime units knot kn (knot) kn 1.0 kn (1.9 km/h; 1.2 mph)
  • kn mph

TEMPERATURE
(Full list)
system unit unit-
code
abbrev-
iation
notes sample default
conversion
combination
output units
SI K K K Allows triple output units. See: full list. 1.0 K (−272.15 °C; −457.87 °F)
  • K °C (K C)
  • K °R (K R)
  • K °F (K F)
°C °C (C) °C 1.0 °C (33.8 °F)
  • °C K (C K)
  • °C °R (C R)
  • °C °F (C F)
Imperial
&
US customary
°R °R (R) °R 1.0 °R (0.556 K; −458.670 °F; −272.594 °C)
  • °R K (R K)
  • °R °C (R C)
  • °R °F (R F)
°F °F (F) °F 1.0 °F (−17.2 °C)
  • °F K (F K)
  • °F °C (F C)
  • °F °R (F R)
Celsius change C-change Used for temperature intervals instead of actual temperatures
Example:  {{convert|5|C-change|0}} warmer
Result: 5 °C (9 °F) warmer
Fahrenheit change F-change Used for temperature intervals instead of actual temperatures
Example:  {{convert|10|F-change|0}} colder
Result: 10 °F (6 °C) colder

TORQUE
(Full list)
system unit unit-
code
abbrev-
iation
notes sample default
conversion
combination
output units
Industrial
SI newton metre Nm N·m Triple combinations are also possible. See the full list. 1.0 N·m (0.74 lbf·ft)
  • Nm kg.m
  • Nm lb.ft
Non-SI metric kilogram metre kg.m kg·m 1.0 kg·m (9.8 N·m; 7.2 lb·ft)
  • kg.m Nm
  • kg.m lb.ft
Imperial
&
US customary
pound force-foot lb.ft lb·ft 1.0 lb·ft (1.4 N·m)
  • lb.ft Nm
  • lb.ft kg-m
Scientific
SI newton metre N.m N·m Triple combinations are also possible. See the full list. 1.0 N·m (0.74 lbf·ft)
  • N.m kgf.m
  • N.m lbf.ft
Non-SI metric kilogram force-metre kgf.m kgf·m 1.0 kgf·m (9.8 N·m; 7.2 lbf·ft)
  • kgf.m N.m
  • kgf.m lbf.ft
Imperial
&
US customary
pound force-foot lbf.ft lbf·ft 1.0 lbf·ft (1.4 N·m)
  • lbf.ft N.m
  • lbf.ft kgf.m

VOLUME
(Full list)
system unit unit-
code
abbrev-
iation
notes sample default
conversion
combination
output units
SI cubic metre m3 m3 US spelling: cubic meter
one kilolitre
1.0 m3 (35 cu ft)
cubic сантиmetre cm3 сm3 US spelling: cubic centimeter
one millilitre
1.0 сm3 (3.5×10−5 cu ft)
cc cc
cubic миллиmetre mm3 мm3 US spelling: cubic millimeter
1.0 мm3 (3.5×10−8 cu ft)
non-SI metric килоlitre kl кl US spelling: kiloliter
one cubic metre
1.0 кl (220 imp gal; 260 US gal)
kL кL
litre l l US spelling: liter
one cubic decimetre
Allows triple output units. See: full list.
1.0 l (0.22 imp gal; 0.26 US gal)
  • l impgal
  • l USgal
  • l U.S.gal
  • l USdrygal
  • l U.S.drygal
L L
  • L impgal
  • L impqt
  • L USgal
  • L U.S.gal
  • L USdrygal
  • L U.S.drygal
сантиlitre cl сl US spelling: centiliter
1.0 сl (0.0022 imp gal; 0.0026 US gal)
cL сL
миллиlitre ml мl US spelling: milliliter
one cubic centimetre
1.0 мl (0.00022 imp gal; 0.00026 US gal)
  • ml impoz
  • ml USoz
  • ml U.S.oz
mL мL
  • mL impoz
  • mL USoz
  • mL U.S.oz
Imperial
&
US customary
cubic yard cuyd cu yd 1.0 cu yd (0.76 m3)
cubic foot cuft (cufoot) cu ft long code "cufoot" outputs cubic foot (and never feet) 1.0 cu ft (0.028 m3)
cubic inch cuin cu in 1.0 cu in (16 сm3)
Imperial imperial barrel impbbl imp bbl 36 imp gal 1.0 imp bbl (160 l; 36 imp gal; 43 US gal)
imperial bushel impbsh imp bsh 8 imp gal 1.0 imp bsh (36 l; 8.0 imp gal; 8.3 US dry gal)
impbu imp bu
imperial gallon impgal imp gal 4.54609 litres by definition, also
4 imp qt or 8 imp pt or 160 imp fl oz
Allows triple output units. See: full list.
1.0 imp gal (4.5 l; 1.2 US gal)
  • impgal l
  • impgal L
  • impgal USgal
  • impgal U.S.gal
  • impgal USdrygal
  • impgal U.S.drygal
imperial quart impqt imp qt 1/4 imp gal or 40 imp fl oz 1.0 imp qt (1,100 мl; 38 US fl oz)
imperial pint imppt imp pt 1/8 imp gal or 20 imp fl oz 1.0 imp pt (0.57 l)
imperial fluid ounce impoz (impfloz) imp fl oz 1/160 imp gal 1.0 imp fl oz (28 мl; 0.96 US fl oz)
  • impoz USoz
  • impoz U.S.oz
  • impoz ml
  • impoz mL
US customary
liquid measure
US barrel USbbl US bbl 31½ US gal
used for liquids except for oil and beer (see the full list)
1.0 US bbl (120 l; 32 US gal; 26 imp gal)
U.S.bbl U.S. bbl
barrel oilbbl bbl 42 US gal 1.0 bbl (0.16 m3)
US beer barrel USbeerbbl
(usbeerbbl)
US bbl 1.0 US bbl (120 l; 31 US gal; 26 imp gal)
U.S.beerbbl
(usbeerbbl)
U.S. bbl
US gallon USgal US gal 231 cubic inches by definition, also
4 US qt or 8 US pt or 128 US fl oz
Allows triple output units. See: full list.
1.0 US gal (3.8 l; 0.83 imp gal)
  • USgal l
  • USgal L
  • USgal impgal
U.S.gal U.S. gal
  • USgal l
  • USgal L
  • USgal impgal
US quart USqt US qt 1/4 US gal or 32 US fl oz 1.0 US qt (950 мl)
U.S.qt U.S. qt
US pint USpt US pt 1/8 US gal or 16 US fl oz 1.0 US pt (0.47 l; 0.83 imp pt)
U.S.pt U.S. pt
US fluid ounce USoz
(USfloz)
US fl oz 1/128 US gal 1.0 US fl oz (30 мl)
  • USoz ml
  • USoz mL
  • USoz impoz
U.S.oz
(U.S.floz)
U.S. fl oz
  • U.S.oz ml
  • U.S.oz mL
  • U.S.oz impoz
US customary
dry measure
US dry barrel USdrybbl US dry bbl 105/32 US bsh 1.0 US dry bbl (0.12 m3)
U.S.drybbl U.S. dry bbl
US bushel USbsh US bsh 2150.42 cubic inches by definition 1.0 US bsh (35 l; 8.0 US dry gal; 7.8 imp gal)
U.S.bsh U.S. bsh
US bushel USbu US bu 2150.42 cubic inches by definition 1.0 US bu (35 l; 8.0 US dry gal; 7.8 imp gal)
U.S.bu U.S. bu
US dry gallon USdrygal US dry gal 1/8 US bsh
Allows triple output units. See: full list.
1.0 US dry gal (4.4 l)
  • USdrygal l
  • USdrygal L
  • USdrygal impgal
U.S.drygal U.S. dry gal
  • U.S.drygal l
  • U.S.drygal L
  • U.S.drygal impgal
US dry quart USdryqt US dry qt 1/32 US bsh 1.0 US dry qt (1,100 мl)
U.S.dryqt U.S. dry qt
US dry pint USdrypt US dry pt 1/32 US bsh 1.0 US dry pt (550 мl)
U.S.drypt U.S. dry pt

PRESSURE
unit unit-
code
abbrev-
iation
sample default
conversion
гигаpascal GPa ГPa 1.0 ГPa (150,000 psi)
мегаpascal MPa МPa 1.0 МPa (150 psi)
килоpascal kPa кPa 1.0 кPa (0.15 psi)
гектоpascal hPa гPa 1.0 гPa (0.015 psi)
pascal Pa Pa 1.0 Pa (0.00015 psi)
миллиpascal mPa мPa 1.0 мPa (1.5×10−7 psi)
millibar mbar mbar 1.0 mbar (1.0 гPa)
mb mb
decibar dbar dbar 1.0 dbar (10 кPa)
bar bar (none) 1.0 bar (100 кPa)
kilobarye kBa kBa 1.0 kBa (1.0 гPa)
barye Ba Ba 1.0 Ba (0.10 Pa)
standard atmosphere atm atm 1.0 atm (100 кPa)
torr Torr Torr 1.0 Torr (0.13 кPa)
millimetre of mercury mmHg mmHg 1.0 mmHg (0.13 кPa)
inch of mercury inHg inHg 1.0 inHg (3.4 кPa)
pound per square inch psi psi 1.0 psi (6.9 кPa)
FUEL EFFICIENCY
unit unit-
code
notes combinations
kilometres per litre km/l (km/L) Use km/L to get "km/L"
  • km/l mpgimp
  • km/l mpgus
litres per 100 kilometres l/100 km (L/100 km) Use L/100 km to get "L/100 km"
  • l/100 km mpgimp
  • l/100 km mpgus
litres per kilometre l/km (L/km) Use L/km to get "L/km"
  • l/km impgal/mi
  • l/km usgal/mi
miles per imperial gallon mpgimp
  • mpgimp mpgus
miles per US gallon mpgus (mpgUS, mpgU.S.) Use mpgUS to get "US"

Use mpgU.S. to get "U.S."
mpgus will give "U.S." if spelling is
set to US & "US" otherwise

  • mpgus mpgimp
imperial gallons per mile impgal/mi
  • impgal/mi
US gallons per mile usgal/mi (USgal/mi, U.S.gal/mi) As above with the us vs US vs U.S.
  • usgal/mi
The mpgUS, mpgU.S., USgal/mi vs U.S.gal/mi, km/L, L/100 km and L/km variants work within combinations also (making 36 combinations in total).
POWER
Watts, kilowatts, milliwatts, etc. are supported. As is horsepower (English & metric). Use standard abbreviations as input code (lowercase hp for horsepower, for example)
POPULATION DENSITY
unit unit-
code
notes combinations
inhabitants per square kilometre PD/sqkm PD stands for population density, i.e. humans (inhabitants)
  • PD/sqkm PD/sqmi
per square kilometre /sqkm Used when the word 'inhabitants' would be inappropriate.
  • /sqkm /sqmi
inhabitants per hectare PD/ha
  • PD/ha PD/acre
per hectare /ha
  • /ha /acre
inhabitants per square mile PD/sqmi PD stands for population density, i.e. humans (inhabitants)
  • PD/sqmi PD/sqkm
per square mile /sqmi Used when the word 'inhabitants' would be inappropriate.
  • /sqmi /sqkm
inhabitants per acre PD/acre
  • PD/acre PD/ha
per acre /acre
  • /acre /ha
COST PER UNIT MASS
unit unit-
code
notes combinations
dollars per pound $/lb "$" can mean US$, HK$, etc.
  • (none)
dollars per kilogram $/kg
  • (none)
dollars per troy ounce $/ozt 12 troy ounces in 1 troy pound
  • (none)

'per' units: kg/hl[вироиш]

When using a slash (/), a unit like kg/hl is recognized as kilograms per hectolitre and will be converted with other mass/volume units.

  • {{convert|1000|kg/hl}} → 1,000 килоgrams per гектоlitre (1,600 oz/imp gal)

Units of difference: 10 °C higher; how much in °F[вироиш]

When a number is the measurement for a difference, one conversion is done. This may occur in temperatures (°C, °F, K). Compare this to a range, when two conversions are done.

The only available units of difference are: |C-change=, |F-change= and |K-change=.

  • {{convert|10|C}} → 10 °C (50 °F), regular temperature
  • {{convert|10|C-change}} → 10 °C (18 °F), difference (e.g., "The temperature changed from 30 into 40 °C")
  • {{convert|10-15|C}} → 10–15 °C (50–59 °F), range (e.g., "The temperature is between 10 and 15 °C")

Consistently, into multiple units:

  • A rise of {{convert|10|C-change|F-change K-change}} → A rise of 10 °C (18 °F; 10 K)

Multiple units: 1 ft 5 in[вироиш]

In input[вироиш]

Base document Шаблон:Slink lists options for multiple unit input (like ft,in). It can catch predefined sets only (units that can be subdivided; e.g., yd into ft):

  • {{convert|1|yd|2|ft|3|in}} → 1 yard 2 фут 3 дюйм (1.60 м)
  • {{convert|2|ft|3|in|cm}} → 2 фут 3 дюйм (69 см)
  • {{convert|1|lb|5|oz|g}} → 1 pound 5 ounces (600 g)

In output[вироиш]

Available multiple-unit output options predefined, like ftin and ydftin. The full list is at Шаблон:Slink.

  • {{convert|2|m|ftin}} → 2 метр (6 ft 7 in)
  • {{convert|2|m|ft in}} → 2 метр (6.6 ft; 79 in), using a space, returns the decimal point

Default behaviour, for comparison:

  • {{convert|2|m}} → 2 метр (6 ft 7 in)

See also:

  • {{hands}} a length used to measure horses
  • {{Long ton}} a weight in ton, cwt, qr and lb

Currency per unit: $/mi → $/km[вироиш]

Using currency symbols in a $ per unit value, you can convert the per-unit:

  • {{convert|10|$/mi|$/km}} → $10 per mile ($6.2/км)

You can set the currency in both values using |$=€:

  • {{convert|10|$/mi|$/km|$=€}} → €10 per mile (€6.2/км)

It is not possible to convert the currency. So, this result (mixed currencies) is not possible: $15 per mile (€8.6/km) Red XN

Parameter list[вироиш]

Parameter options for {{convert}}
Option =.. Description Note
|abbr=in in Use symbol for first (left-hand side) unit Symbol ('abbreviation')
|abbr=off off Use name for all units Symbol ('abbreviation')
|abbr=none none
|abbr=on on Use symbol for all units Symbol ('abbreviation')
|abbr=out out Use symbol for right-hand side unit (default) Symbol ('abbreviation')
|abbr=values values Show only input and output numbers, not units Parts only
|abbr=~ ~ Shows both unit name and symbol Symbol & name
|adj=j j Join number and unit name using "&nbsp;" instead of a space Join values
|adj=mid|x=... mid User-specified text after the input unit; sets adj=on (adjective) Word adding, adjective
|adj=on on Unit name is adjective (singular and hyphenated) Grammar, adjective
|adj=pre|x=... pre User-specified text before input unit Word adding
|adj=ri0 ri0 Round input with precision 0 Rounding and sigfig
|adj=ri1 ri1 Round input with precision 1 Rounding and sigfig
|adj=ri2 ri2 Round input with precision 2 Rounding and sigfig
|adj=ri3 ri3 Round input with precision 3 Rounding and sigfig
|disp=b b Join input and output using " (...)" (default) Join values
|disp=sqbr sqbr Join input and output using " [...]" Join values
|disp=br br Join input and output using "<br/>" Join values
|disp=comma comma Join input and output using ", " Join values
|disp=or or Join input and output using " or " Join values
|disp=number number Display output number only Parts only
|disp=output number only output number only
|disp=out out Display only output number and name/symbol Parts only
|disp=output only output only
|disp=preunit|x=... preunit User-specified text before input and output units Word adding
|disp=table table Output is suitable for a table cell with align="right" Table columns
|disp=tablecen tablecen Output is suitable for a table cell with align="center" Table columns
|disp=unit unit Display input name/symbol only ( not input number, not output) Parts only
|disp=unit2 unit2 Display output name/symbol only (not input; not output number) Parts only
|disp=x|... x Join input and output using user-specified text Word adding
|comma=5 05 Only use comma for thousands separator if 5 or more digits Number format
|comma=gaps gaps Use gaps (space), not comma, for thousands separator Number format
|comma=gaps5 gaps5 Use gaps (space), but only if 5 or more digits Number format
|comma=off off No thousands separator Number format
|frac=N N Show imperial number in fractions, denominator=N Number format, fraction
|lk=in in Link left-hand side unit name or symbol Unit link
|lk=on on Link all unit names or symbols (but not twice for the same unit) Unit link
|lk=out out Link right-hand side unit name or symbol Unit link
|order=flip flip Inverts order of input, output measurements (conversion first) Order
|round=5 05 Rounds calculation to the nearest multiple of 5 Rounding and sigfig
|round=25 25 Rounds calculation to the nearest multiple of 25 Rounding and sigfig
|round=each each In a range, each number is rounded by the default rounding Rounding and sigfig
|sigfig=N N Round output number to N significant figures (N is a positive integer) Rounding and sigfig
|sortable=in in Output numeric hidden sort field for use in a sortable table (based on input) Table sort
|sortable=on on
|sortable=out out Output numeric hidden sort field for use in a sortable table (based on output) Table sort
|sp=us us Use U.S. spelling (like "meter" instead of default "metre") Spelling U.S. names
|spell=in in Spell input number in words Spelling numbers
|spell=In In Spell input number in words with first letter uppercase Spelling numbers
|spell=on on Spell input and output numbers in words Spelling numbers
|spell=On On Spell input and output numbers in words with first letter uppercase Spelling numbers
|$= $ Replace $-sign with a currency sign, for example in $/acre (no currency conversion happens) Cost per unit
|debug=yes yes Debugging only. In a sortable table: show the normally hidden sort key Table sort
|abbr=comma comma Deprecated. Use |comma=off Number format
|abbr=mos mos Deprecated. Use |x| or |by| Range format
|adj=1 01 Deprecated. Do not use. No need to deviate from MOS regarding plurals Plural or singular
|adj=flip flip Deprecated. Use |order=flip Order
|adj=nocomma nocomma Deprecated. Use |comma=off Number format
|disp=2 02 Deprecated. Use |disp=output only Parts only
|disp=5 05 Deprecated. Use |round=5 Rounding and sigfig
|disp=flip flip Deprecated. Use |order=flip Order
|disp=flip5 flip5 Deprecated. Use |order=flip |round=5 Order, rounding
|disp=nocomma nocomma Deprecated. Use |comma=off Number format
|disp=u2 u2 Deprecated. Use |disp=unit2 Parts only
|near=5 05 Deprecated. Use |round=5 Rounding and sigfig

Deprecated options[вироиш]

This list: view · talk · edit

Deprecated options should not be used. They may produce incorrect or undesired results and there is no guarantee that they will be supported in the future.

  • abbr=comma is deprecated. Use comma=off instead
  • abbr=mos, setting range separators, is deprecated (not MOS compliant). Use |by| or |x| instead
  • adj=1 is deprecated. No need to deviate from MOS regarding plurals
  • adj=flip is deprecated. Use order=flip instead
  • adj=nocomma is deprecated. Use comma=off instead
  • disp=2 is deprecated. Use disp=output only instead
  • disp=5 is deprecated. Use round=5 instead
  • disp=flip is deprecated. Use order=flip instead
  • disp=flip5 is deprecated. Use |order=flip |round=5 instead
  • disp=nocomma is depreated. Use comma=off instead
  • disp=slash, disp=s, disp=/ are deprecated. Use disp=or instead
  • disp=u2 is deprecated. Use disp=unit2 instead
  • near=5 is deprecated. Use round=5 instead
  • Range separator |xx| is deprecated (not MOS compliant). Use |x| instead
  • Range separator |*| is deprecated (not MOS compliant). Use |x| instead
  • Range separator |&| is deprecated. Use |and| instead
  • Range separator |to-| is deprecated. Use |to(-)| instead

TemplateData[вироиш]

This is the TemplateData documentation for this template used by VisualEditor and other tools.

Convert

Converts measurements to other units.

Template parameters

This template prefers inline formatting of parameters.

ПараметрТавзеҳотTypeStatus
value1

the value to convert

Numberrequired
from unit2

the unit for the provided 'value'

Example
km
Linerequired
to units3

the unit to convert into

Example
mi
Stringsuggested
precision or suffix4

significant digits after decimal dot or, if negative, exponent of ten

Numberoptional
link unitslk

“on” all, “in” input, “out” output or “off” no units

Пешфарз
off
Example
on
Stringoptional
abbreviationabbr

display for the units: “on” unit symbols, “off” all unit names in full words, “in” input unit symbol, “out” abbreviated output units, “unit” both input and output units abbreviated when using scientific notation, “values” no units at all

Пешфарз
off
Stringoptional
spellingsp

“us” display U.S. spelling of unit names

Example
us
Stringoptional
adjectiveadj

adjective form (singular unit name appended by hyphen) “on” or “mid” to put conversion at end

Пешфарз
off
Example
on
Booleanoptional
conversiondisp

display conversion result: “or” after ‘or’, “x” with custom prefix and suffix, “b” in parentheses, “table”/“tablecen”, “output only” alone, “output number only” alone and without unit, “unit” not at all but input unit; if the value is a number it is used as precision

Example
b
Stringoptional
orderingorder

“flip” returns converted value first, input value second.

Example
flip
Stringoptional
significant figuressigfig

number that sets the number of significant figures

Numberoptional
rounding outputround

“5” rounds the output number to nearest multiple of 5, “25” to nearest multiple of 25, “each” rounds each number in a range

Numberoptional
thousands separatorcomma

Sets or suppresses thousand separator in the numbers. “off” = no separator; “gaps”: use space not comma; “5” and “gaps5”: only add separator when number > 5 positions (10,000 or more)

Пешфарз
on
Example
off
Stringoptional
sort keysortable

“on” generates a hidden sort key

Example
on
Stringoptional

See also[вироиш]