Шаблон:Height

Мавод аз Википедиа — донишномаи озод
Ҷаҳиш ба: новбари, Ҷустуҷӯи


[вироиш] Template-info.svg Ҳуҷҷатҳои шаблон
Information.svg Ҳуҷҷатҳо

Instructions[вироиш]

  • The template is intended for conversion of heights specified in either feet and inches, or metric units (centimetres or metres). Metric units are converted to feet and inches, and feet and inches are converted to meters.
  • As this template is intended for use in infoboxes, the units on both sides of the conversion are abbreviated by default. When using this template outside of infoboxes, use the abbr parameter, which can take values of yes (default; both sides of the conversion are abbreviated), no (both sides of the conversion are spelled out), or mos (WP:MOSNUM-compliant format, where the units being converted are spelled out and the units of the converted values are abbreviated).
  • For conversion of metric units to feet/inches, the frac parameter can be specified to either show the output inches as decimals (frac=10) or as a vulgar fraction (frac=desired denominator; the default is 2 for halves). The frac parameter is ignored for conversion of feet/inches to meters.
  • When decimal output is used, the default precision is 1 for meters-to-feet/inches conversion and 2 for feet/inches-to-meters conversion, but it can be overridden by specifying a different figure using the precision parameter (see example below). The precision parameter is ignored when frac is set to anything but 10.
  • wiki parameter specifies whether the names of the units should be wikified or not and can take values of either yes or no. The default value is no.

Code[вироиш]

Code Result
{{height|m=1.77|precision=0}} 1.77 м (5 ft 10 in)*
{{height|cm=177|precision=0}} 177 см (5 ft 10 in)*
{{height|cm=177|frac=16}} 177 см (5 ft 9 1116 in)
{{height|ft=6}} 6 ft 0 in (1.83 м)
{{height|ft=6|in=1}} 6 ft 1 in (1.85 м)
{{height|ft=6|in=1|precision=1}} 6 ft 1 in (1.9 м)
{{height|ft=5|in=7+1/2}} 5 ft 7 12 in (1.71 м)
{{height|ft=5|in=7+1/2|precision=1}} 5 ft 7 12 in (1.7 м)
{{height|in=10}} 0 ft 10 in (0.25 м)
{{height|ft=6|in=2|abbr=mos}} 6 фут 2 дюйм (1.88 м)
{{height|ft=6|in=2}} 6 ft 2 in (1.88 м)
{{height|ft=5|in=7+1/2|precision=3}} 5 ft 7 12 in (1.715 м)
{{height|cm=200|in=2|precision=0}} Error: please specify height using only one type of units
  • m is for meters
  • cm is for centimetres
  • ft is for feet
  • in is for inches

Template data[вироиш]

This is the TemplateData documentation for this template used by VisualEditor and other tools.

Height

The template is intended for conversion of heights specified in either meters or in feet and inches.

Template parameters

Parameter Description Type Status
Meters mmetermetersmetremetres

The height in meters. Do not use if feet and inches are specified.

Default
холӣ
Example
empty
Auto value
холӣ
Number optional
Centimeters cmcentimetercentimeterscentimetrecentimetres

The height in centimeters. Do not use if feet and inches are specified.

Default
холӣ
Example
empty
Auto value
холӣ
Number optional
Feet ftfootfeet

The feet part of the height in feet and inches. Do not use if centimeters are specified.

Default
холӣ
Example
empty
Auto value
холӣ
Number optional
Inches ininchinches

The inches part of the height in feet and inches (optional). Do not use if centimeters are specified. Fractions are supported in the form u+n/d.

Default
холӣ
Example
empty
Auto value
холӣ
Number optional
Precision of converted value precision

The amount of decimal places to display the converted value to. Defaults to 2 for feet and inches to meters and to 1 for meters/centimeters to feet and inches.

Default
холӣ
Example
empty
Auto value
холӣ
Number optional
Fraction denominator frac

Shows result as a fraction. The number in this parameter is the denominator of the fraction. Used only for meters/centimeters to feet and inches. Set to "10" for decimals. Defaults to 2 (halves).

Default
холӣ
Example
empty
Auto value
холӣ
Number optional
Abbreviation style abbr

Changes abbreviation style. Set to "yes" for all units to be abbreviated (default), "no" for all to be spelled out, or "mos" for the units being converted to be spelled out and the converted units to be abbreviated.

Default
холӣ
Example
empty
Auto value
холӣ
String optional
Unit linking wiki

Changes whether units are linked. Set to "no" to not link units (default) or "yes" to link units.

Default
холӣ
Example
empty
Auto value
холӣ
String optional

See also[вироиш]

  • {{convert}}
    • {{convert|1.82|m|ftin|frac=4|abbr=on}} → 1.82 м (5 ft 11 34 in)
    • {{convert|182|cm|ftin|frac=4|abbr=on}} → 182 см (5 ft 11 34 in)
    • {{convert|5|ft|11+3/4|in|m|2|abbr=on}} → 5 ft 11 34 in (1.82 м)
    • {{convert|5|ft|11+3/4|in|cm|0|abbr=on}} → 5 ft 11 34 in (182 см)