Шаблон:Infobox dam/doc
Этот шаблон реализован на основе Lua с использованием модуля Module:Check for unknown parameters. |
Usage
[вироиши манбаъ]Use the following infobox for all types of hydroelectric power stations involving dams. For all types of pumped-storage, wave, and tidal power stations, please use {{Infobox power station}}.
{{Infobox dam | name = | name_official = | image = | image_size = | image_caption = | image_alt = | location_map = | location_map_size = | location_map_caption = | location_map_alt = | lat_d = | lat_m = | lat_s = | lat_NS = | long_d = | long_m = | long_s = | long_EW = | coordinates_type = type:landmark | coordinates_display = inline,title | country = | location = | purpose = | status = | construction_began = | opening = | demolished = | cost = | owner = | operator = | dam_type = | dam_crosses = | dam_height = | dam_height_foundation= | dam_height_thalweg = | dam_length = | dam_elevation_crest = | dam_width_crest = | dam_width_base = | dam_volume = | spillway_count = | spillway_type = | spillway_capacity = | res_name = | res_capacity_total = | res_capacity_active = | res_capacity_inactive= | res_catchment = | res_surface = | res_max_length = | res_max_width = | res_max_depth = | res_elevation = | res_tidal_range = | plant_name = | plant_lat_d = | plant_lat_m = | plant_lat_s = | plant_lat_NS = | plant_long_d = | plant_long_m = | plant_long_s = | plant_long_EW = | plant_operator = | plant_commission = | plant_decommission = | plant_type = | plant_hydraulic_head = | plant_turbines = | plant_capacity = | plant_capacity_factor= | plant_annual_gen = | website = | extra = }}
Parameter names and descriptions
[вироиши манбаъ]Parameter name | Description |
---|---|
name | Name of dam. |
name_official | Official name, if different from name. Preferably in native language. |
image | Image filename, without File: parameter. Animated (.gif) and media files (.ogv) are also allowed. |
image_size | Value to overrides the default 250px. |
image_caption | Caption beneath image. |
image_alt | Alternative text for image. |
location_map | Name of a location map file. The coordinates must be specified as well (see below). |
location_map_size | Value to overrides the default 250px. |
location_map_caption | Caption beneath location map. |
location_map_alt | Alternative text for location map. |
lat_d | Latitude degrees. |
lat_m | Latitude minutes. Omit or leave blank if lat_d is in decimal format. |
lat_s | Latitude seconds. Omit or leave blank if lat_d is in decimal format. Remember to avoid being overly precise. |
lat_NS | Northern or Southern latitude (enter N or S ). Omit or leave blank if lat_d is in decimal format.
|
long_d | Longitude degrees. |
long_m | Longitude minutes. Omit or leave blank if long_d is in decimal format. |
long_s | Longitude seconds. Omit or leave blank if long_d is in decimal format. Remember to avoid being overly precise. |
long_EW | Longitude East or West (enter E or W ). Omit or leave blank if long_d is in decimal format.
|
coordinates_type | Optional parameter to add additional coordinate functions. See here for more details. |
coordinates_display | Display the coordinates inline or title, or both as inline,title. |
country | Country where the facility is located. Do not use flag icons. |
location | General area where located. Avoid being overly-detailed. |
purpose | Purpose of the dam(s). Common reasons are power, irrigation, flood control, navigation. If there are several purposes, consider using: Multi-purpose. Field codes: F =Flood control, I =Irrigation,, |
status | Current status of the project. Enter any one of the following auto-expanding fields: D =Decommissioned, O =Operational, P =Proposed, UC =Under construction.
|
construction_began | Date construction began, consider using {{Start date}}. |
opening | Date, or future date, of inauguration. Consider using {{Start date}}. |
demolished | Date of demolition (i.e removal or destruction of dam). Consider using {{End date}}. |
cost | Total cost of development. |
owner | Owner(s) of the dam. Consider limiting to the top two, and include ownership percentage if possible. Example: |
operator | Operator(s) of the dam. Only use this parameter if it is different from the owner(s) of the dam. |
dam_type | Type of dam. Enter any one of the following auto-expanding fields:
|
dam_crosses | Body of river or stream below dam |
dam_height | Height of dam. Depreciated parameter; use only if dam_height_foundation or dam_height_thalweg is not known.
|
dam_height_foundation | Height over foundation bed, with metric conversions. |
dam_height_thalweg | Height over thalweg (riverbed), with metric conversions. |
dam_length | Length of dam crown, with metric conversions. |
dam_elevation_crest | Height of the dam's crest above sea level, with metric conversions. |
dam_width_crest | Width at crest of dam, with metric conversions. |
dam_width_base | Width at base of dam, with metric conversions. |
dam_volume | Volume of material in the dam structure. |
spillway_count | Number of spillways. |
spillway_type | Type of spillway. |
spillway_capacity | Capacity of spillway. |
res_name | Name of upstream body of water, if different than "dam_crosses". |
res_capacity_total | Capacity of reservoir, i.e. megalitres. |
res_capacity_active | The active, live or useful capacity (storage) of the reservoir. |
res_capacity_inactive | The inactive or dead capacity (storage) of the reservoir. |
res_catchment | Area of catchment for reservoir. |
res_surface | Surface area (top water level) of reservoir. |
res_max_length | Length of the reservoir at normal levels, with metric conversions. |
res_max_width | Maximum width of the reservoir at normal levels, perpendicular to length. With metric conversions. |
res_max_depth | Maximum water depth of reservoir. |
res_elevation | The reservoir's height above sea level at normal levels, ith metric conversions. |
res_tidal_range | Tidal range, if applicable. |
plant_name | Name of plant, if applicable. |
plant_operator | Operator(s) of the hydroelectric power plant. |
plant_lat_d | Latitude degrees. |
plant_lat_m | Latitude minutes. Omit or leave blank if lat_d is in decimal format. |
plant_lat_s | Latitude seconds. Omit or leave blank if lat_d is in decimal format. Remember to avoid being overly precise. |
plant_lat_NS | Northern or Southern latitude (enter N or S ). Omit or leave blank if lat_d is in decimal format.
|
plant_long_d | Longitude degrees. |
plant_long_m | Longitude minutes. Omit or leave blank if long_d is in decimal format. |
plant_long_s | Longitude seconds. Omit or leave blank if long_d is in decimal format. Remember to avoid being overly precise. |
plant_long_EW | Longitude East or West (enter E or W ). Omit or leave blank if long_d is in decimal format.
|
plant_commission | Power plant commissioning date. May be different than dam opening date. |
plant_decommission | Power plant decommissioning date. May be different than dam closing date. |
plant_type | Type of hydroelectric power station. Enter any one of the following auto-expanding fields:
|
plant_hydraulic_head | Hydraulic head at power station. |
plant_turbines | Number of turbines, with respective rated capacity. |
plant_capacity | Installed generation capacity, measured in megawatts (MW). |
plant_capacity_factor | Capacity factor of the power station, in percentage. |
plant_annual_gen | Average annual power generation of the previous year. Measured in gigawatt-hours (GWh) |
website | Raw wikitext for entering website(s). Use [brackets] where appropriate |
extras | Free form, spans both columns. Use sparingly. |
Coordinates
[вироиши манбаъ]The coordinates can be specified using one of three different methods
- lat_d, lat_m, lat_s, lat_NS, long_d, long_m, long_s, long_EW – For DMS style coordinates which can be used specify the pushpin in a {{Location map}}.
- lat_d and long_d – for decimal style coordinates which can be used to specify the pushpin in a {{Location map}}.
- coordinates – with a {{coord}} template which cannot be used with the
{{Location map}}
.
See Wikipedia:WikiProject Geographical coordinates#Parameters for more details about setting the coordinates_type.
Microformat
[вироиши манбаъ]The HTML mark up produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.
Sub-templates
[вироиши манбаъ]If the place or venue has an "established", "founded", "opened" or similar date, use {{start date}} unless the date is before 1583 CE.
If it has a URL, use {{URL}}.
Please do not remove instances of these sub-templates.
Classes
[вироиши манбаъ]hCard uses HTML classes including:
- adr
- agent
- category
- county-name
- extended-address
- fn
- label
- locality
- nickname
- note
- org
- region
- street-address
- uid
- url
- vcard
Geo is produced by calling {{coord}}, and uses HTML classes:
- geo
- latitude
- longitude
Please do not rename or remove these classes nor collapse nested elements which use them.
Precision
[вироиши манбаъ]When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name=
parameter.
See also
[вироиши манбаъ]- Hidden tracking/maintenance categories
- Гурӯҳ:Pages using infobox dam with unknown parameters (via Module:Check for unknown parameters)
- Гурӯҳ:Pages using infobox dam with deprecated parameters