Шаблон:Infobox power station/doc
Этот шаблон реализован на основе Lua с использованием модуля Module:Check for unknown parameters. |
Usage
[вироиши манбаъ]Use the following infobox for all types of power stations. For hydroelectric power stations involving dams (except tidal facilities), please use {{Infobox dam}}. Hold down CTRL to copy separate sections of the template code (Windows):
{{Infobox power station | name = | name_official = | image = | image_size = | image_caption = | image_alt = | location_map = | location_map_size = | location_map_caption = | location_map_alt = | lat_d = | lat_m = | lat_s = | lat_NS = | long_d = | long_m = | long_s = | long_EW = | coordinates_type = type:landmark | coordinates_display = inline,title | country = | location = | status = | construction_began = | commissioned = | decommissioned = | cost = | owner = | operator = <!------------------------- GEOTHERMAL POWER STATIONS --> | geo_type = | geo_temp_requirement = | geo_well_count = | geo_well_depth = | geo_water_output = | geo_cogeneration = <!------------------------- NUCLEAR POWER STATIONS --> | np_reactor_type = | np_reactor_supplier = | np_fuel_type = | np_fuel_supplier = | np_cogeneration = | np_cooling_source = | np_cooling_towers = <!------------------------- PUMPED-STORAGE POWER STATIONS --> | psps_upper_res = | psps_upper_res_capacity= | psps_penstocks = | psps_lower_res = | psps_lower_res_capacity= | psps_hydraulic_head = | psps_generators = | psps_pumpgenerators = | psps_pumps = <!------------------------- SOLAR FARMS --> | solar_type = | solar_cpv_concentration= | solar_csp_technology = | solar_csp_heliostats = | solar_cpvt = | solar_site_area = <!------------------------- THERMAL POWER STATIONS --> | th_fuel_primary = | th_fuel_secondary = | th_fuel_tertiary = | th_technology = | th_feed_mine = | th_cogeneration = | th_combined_cycle = | th_cooling_source = <!------------------------- TIDAL POWER STATIONS --> | tide_technology = | tide_tsg_type = | tide_barrage_height = | tide_barrage_length = | tide_barrage_width = | tide_crosses = | tide_channel_width = | tide_channel_speed = | tide_dtp_length_perp = | tide_dtp_length_para = | tide_range = <!------------------------- WAVE FACILITIES --> | wave_technology = | wave_site_area = | wave_generator_depth = | wave_shore_distance = <!------------------------- WIND FARMS --> | wind_farm_type = | wind_site_elevation = | wind_site_usage = | wind_site_area = | wind_offshore_depth = | wind_offshore_distance = | wind_hub_height = | wind_rotor_diameter = | wind_rated_speed = <!------------------------- GENERAL --> | ps_units_operational = | ps_units_manu_model = | ps_units_uc = | ps_units_planned = | ps_units_cancelled = | ps_units_decommissioned= | thermal_capacity = | ps_electrical_capacity = | ps_electrical_cap_fac = | ps_storage_hours = | ps_annual_generation = | website = | extra = }}
Parameters
[вироиши манбаъ]Parameter | Description |
---|---|
Lead section | |
name | Name of power station |
name_official | Official name, if different from name. Preferably in native language. |
image | Image filename, without File: parameter. |
image_size | Avoid using: Overrides the default 250px |
image_caption | Caption beneath image |
image_alt | Alternative text for image. |
location_map | Name of a location map file. The coordinates must be specified as well (see below). |
location_map_size | Avoid using: Overrides the default 250px |
location_map_caption | Caption beneath the location map |
location_map_alt | Alternative text for location map. |
lat_d | Latitude degrees. |
lat_m | Latitude minutes. Omit or leave blank if lat_d is in decimal format. |
lat_s | Latitude seconds. Omit or leave blank if lat_d is in decimal format. Remember to avoid being overly precise. |
lat_NS | Northern or Southern latitude (enter N or S ). Omit or leave blank if lat_d is in decimal format.
|
long_d | Longitude degrees. |
long_m | Longitude minutes. Omit or leave blank if long_d is in decimal format. |
long_s | Longitude seconds. Omit or leave blank if long_d is in decimal format. Remember to avoid being overly precise. |
long_EW | Longitude East or West (enter E or W ). Omit or leave blank if long_d is in decimal format.
|
coordinates_type | Optional parameter to add additional coordinate functions. See here for more details. |
coordinates_display | Display the coordinates inline or title, or both as inline,title. |
country | Country where the facility is located. Do not use flag icons, as this places an unnecessary emphasis on nationality; see for a detailed rationale. |
location | General area where located. Avoid being overly-detailed. |
status | State of the project. Enter any one of the following auto-expanding fields:
|
construction_began | Date construction of the first unit began, consider using {{Start date}}. |
commissioned | Date commissioned, or to be commissioned, of the first unit. Consider using {{Start date}}. |
decommissioned | Date decommissioned, or to be decommissioned, of the last unit. Consider using {{End date}}. |
cost | Total cost of development |
owner | Owner(s) of the power station. Consider limiting to the top two, and include ownership percentage. Example: |
operator | Plant operator(s). If different from owner. |
Geothermal power stations | |
geo_type | The type of geothermal power station. Enter any one of the following auto-expanding fields:
|
geo_temp_requirement | Minimum temperature requirement of geothermal source. Consider using: {{Convert|XX|C|F|0|abbr=on}}
|
geo_well_count | Number of geothermal wells. |
geo_well_depth | Depth of the deepest well. |
geo_water_output | Hot water production in litres. |
geo_cogeneration | Is the power station a cogeneration type? Add Yes or No .
|
Nuclear power stations | |
np_reactor_type | The type(s) of reactors currently in use, and its corresponding number of reactors. For multiple reactors types, you may use the <br/> function. For power stations using a single type of reactor, enter any one of the following auto-expanding fields:
|
np_reactor_supplier | Reactor supplier(s) |
np_fuel_type | Type of nuclear fuel. |
np_fuel_supplier | Supplier of nuclear fuel. |
np_cogeneration | Is the power station a cogeneration type? Add Yes or No .
|
np_cooling_towers | Number of cooling towers. |
Pumped-storage hydroelectric power stations | |
psps_upper_res | Name of upper reservoir. |
psps_upper_res_capacity | Water storage capacity of upper reservoir. |
psps_penstocks | Number of penstocks between the reservoirs. |
psps_lower_res | Name of lower reservoir. |
psps_lower_res_capacity | Water capacity of lower reservoir. |
psps_hydraulic_head | Hydraulic head from upper reservoir. |
psps_generators | Number of generation units of the pumped-storage power station. |
psps_pumpgenerators | Number of units used for both generating and pumping. |
psps_pumps | Number of pumping units to the upper reservoir. |
Solar farms | |
solar_type | The type of solar technology in use. Enter any one of the following auto-expanding fields:
|
solar_cpv_concentration | Concentration of CPV plant: Low , Medium , or High . See also: Types of CPV.
|
solar_csp_technology | The CSP technology in use. Enter any one of the following auto-expanding fields:
|
solar_csp_heliostats | Number of heliostats. |
solar_cpvt | Is the power station a CPVT type? Add Yes or No .
|
solar_site_area | Land area used for entire facility. Consider using: {{Convert|XX|km2|mi2|0|abbr=on}}
|
Thermal power stations | |
th_fuel_primary | Primary fuel source |
th_fuel_secondary | Secondary fuel source (optional) |
th_fuel_tertiary | Tertiary fuel source (optional) |
th_technology | |
th_feed_mine | |
th_cogeneration | Is the power station a cogeneration type? Add Yes or No .
|
th_combined_cycle | Is the power station a combined cycle type? Add Yes or No .
|
th_cooling_source | If the power station uses cooling water, add the source of the water. For other cooling technologies, add the name of technology, e.g. "air-cooled". |
Tidal power stations | |
tide_technology | The tidal technology in use. Enter any one of the following auto-expanding fields. For tidal barrage technology, please use infobox dam. |
tide_tsg_type | Type of tidal stream generator. |
tide_barrage_height | Height of tidal barrage. |
tide_barrage_length | Length of tidal barrage. |
tide_barrage_width | Width of tidal barrage. |
tide_crosses | Channel of water across which the barrage is build, or in which the tidal generators are located. |
tide_channel_width | Width of above mentioned channel. |
tide_channel_speed | Speed of water flow in the above mentioned channel. Consider using: {{Convert|XX|m/s|ft/s|1|abbr=on}}
|
tide_dtp_length_perp | Perpendicular length of the dynamic tidal power structure. |
tide_dtp_length_para | Parallel length of the dynamic tidal power structure. |
tide_range | Tidal range created by the dynamic tidal power structure. |
Wave farms | |
wave_technology | The wave technology in use (capture method). Capture methods are buoy (point absorber), surface-following attenuator, terminator, oriented perpendicular to the direction of wave propagation, oscillating water column, underwater attenuator. |
wave_site_area | Surface area used for entire facility. Consider using: {{Convert|XX|km2|mi2|0|abbr=on}}
|
wave_generator_depth | Average water depth at the converter locations. Consider using: {{Convert|XX|m|ft|0|abbr=on}}
|
wave_shore_distance | Minimum distance from shore of wave farms. Consider using: {{Convert|XX|m|ft|0|abbr=on}}
|
Wind farms | |
wind_farm_type | Type of wind farm (Onshore, Nearshore, Offshore). See also Types of wind farms. |
wind_site_elevation | Highest ground altitude (don't add hub height) over which a turbine is constructed. Consider using: {{Convert|XX|m|ft|0|abbr=on}}
|
wind_site_usage | Ground usage of Onshore wind farms (e.g. Farm land, desert, etc). |
wind_site_area | Area used for entire facility. Consider using: {{Convert|XX|km2|mi2|0|abbr=on}}
|
wind_offshore_depth | Average water depth of Offshore wind farms. Consider using: {{Convert|XX|m|ft|0|abbr=on}}
|
wind_offshore_distance | Minimum distance from shore of Offshore wind farms. Consider using: {{Convert|XX|m|ft|0|abbr=on}}
|
wind_hub_height | Height of the wind turbine towers from base to hub. Consider using: {{Convert|XX|m|ft|0|abbr=on}} If multiple types of turbines are in use, enter the maximum value. |
wind_rotor_diameter | Diameter of wind turbine rotor. Consider using: {{Convert|XX|m|ft|0|abbr=on}} If multiple types of turbines are in use, enter the maximum value. |
wind_rated_speed | Rated wind speed of the wind turbine model. Consider using: {{Convert|XX|m/s|ft/s|1|abbr=on}} If multiple types of turbines are in use, enter the minimum value. |
End section (used by all power station types, including those not listed above) | |
ps_units_operational | Number of currently operational turbines/generating units. Not applicable for pumped-storage power stations. |
ps_units_manu_model | Shortened name(s) of manufacturers and models of currently operational turbines/generating units. |
ps_units_uc | Number of generating units under construction. |
ps_units_planned | Number of generating units currently planned/proposed for installation. |
ps_units_cancelled | Number of planned generating units cancelled. |
ps_units_decommissioned | Number of generating units decommissioned. |
thermal_capacity | Thermal capacity. |
ps_electrical_capacity | Current gross installed capacity in megawatts, or planned capacity from those under development. Add only current value for those operational, but with additional planned. |
ps_electrical_cap_fac | Capacity factor of the power station, in percentage. |
ps_storage_hours | Storage capacity of the power station, in hours. |
ps_annual_generation | Average annual gross power generation of the previous whole year. |
website | Official website. |
extra | Use this field to add an additional infobox within this infobox. Example. |
Microformat
[вироиши манбаъ]The HTML mark up produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.
Sub-templates
[вироиши манбаъ]If the place or venue has an "established", "founded", "opened" or similar date, use {{start date}} unless the date is before 1583 CE.
If it has a URL, use {{URL}}.
Please do not remove instances of these sub-templates.
Classes
[вироиши манбаъ]hCard uses HTML classes including:
- adr
- agent
- category
- county-name
- extended-address
- fn
- label
- locality
- nickname
- note
- org
- region
- street-address
- uid
- url
- vcard
Geo is produced by calling {{coord}}, and uses HTML classes:
- geo
- latitude
- longitude
Please do not rename or remove these classes nor collapse nested elements which use them.
Precision
[вироиши манбаъ]When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name=
parameter.
See also
[вироиши манбаъ]- Hidden tracking/maintenance categories
- Category:Pages using infobox power station with unknown parameters (via Module:Check for unknown parameters)